About Matt Smeltzer

Matt Smeltzer · 11-10-2015

Users are not able to share screen with apple tv or air server installed on the wireless network. I have a 7510 WLC with 140 WLAN's, 130 of these are schools and they FlexConnect Local Switching. Each site has it's own SSID for private and public, t...

Matt Smeltzer · 11-10-2015

Users are not able to share screen with apple tv or air server installed on the wireless network. I have a 7510 WLC with 140 WLAN's, 130 of these are schools and they FlexConnect Local Switching. Each site has it's own SSID for private and public, t...

Matt Smeltzer · 07-22-2015

Cisco FlexConnect 7510 won't boot to backup image. Yesterday I uploaded 8.1.102.0 to our master controller and restarted it when evertyhing was complete, the controller did not restart into 8.1.102.0 it is stuck on the screen that says "cisco bootloa...

Matt Smeltzer · 04-19-2013

I have Cisco 1040 model ap's and now Cisco 1600 ap models that I have up add an LWAPP entry to the dhcpd.conf file to allow the AP's to boot to the controller. Exisiting: option space LWAPP; option LWAPP.controller code 241 = array of ip-address;clas...

Matt Smeltzer · 06-18-2012

Flex 7500Software Version: 7.2.103.0I have a Flex 7500 with 200 1142AP's working fine in remote office and local setup. We have since purchased 3 OEAP 602's and looking to distribute to teleworkers. I have configured the OEAP to point to the NAT'd IP...

Matt Smeltzer · 07-22-2015

Thanks Leo, it's been a year or so since had to do this, as soon as I saw your post that sparked my memory! Thanks very much! Matt

Matt Smeltzer · 04-19-2013

Bingo I see what I need here with one of the bottom lwapp line, this is exactly what I am looking for! Thanks so much for that!Sent from Cisco Technical Support iPhone App

Matt Smeltzer · 04-19-2013

Thanks Scott in some sites we have 155 sites that report back to the master controller and the server entry we do use some sites just use a simple DNs server that is Linux will have to figure out option 43! LolThanks for all your help ScottMSent from...

Matt Smeltzer · 04-19-2013

Thanks ScottAny suggestion what syntax I would use to have all ap's that boot go to one particular controller?ThanksMattSent from Cisco Technical Support iPhone App

Matt Smeltzer · 09-29-2011

Hi There,I am having the same issue, are you able to point me in right direction where to setup the MBSSID in the GUI?ThanksMatt

Member Since	‎07-14-2011 12:16 PM
Date Last Visited	‎05-15-2019 12:03 AM
Posts	16
Total Helpful Votes Received	5

User Statistics

User Activity

Users are not able to AirPlay to Air Server or Apple TV - Cisco WLC

Users are not able to AirPlay to Air Server or Apple TV - Cisco WLC

Cisco FlexConnect 7510 won't boot to backup image, stuck on "cisco bootloader loading stage2"

Multiple AP Models in dhcpd.conf file

OEAP 602 can't connect to WLC - WLC doesn't have DTLS enabled

Thanks Leo, it's been a year

Re: Multiple AP Models in dhcpd.conf file

Re: Multiple AP Models in dhcpd.conf file

Re: Multiple AP Models in dhcpd.conf file

WPA2 / Cisco 1231s / Apple iPhone issues