About edwardzeng

edwardzeng · 06-16-2019

Hi,Does anyone know how to use the external Database to manage the End point devices mac address for the iPSK?I have set up the iPSK with ISE 2.3, we would like to know how to use the external Database to store these MAC address instead of the ISE in...

edwardzeng · 10-06-2014

Hi,All our Cisco core switches are using VRF for management.I would like to setup EEM to send email alarm to me when things happen.But how can I send email to mail server in different VRF? Many thanks,

edwardzeng · 08-01-2013

Good day all,I have a question about the N+1 5508 failover test: Should I shutdown one of the primary WLC to test failover?I just setup the N+1 bakcup WLC (5508). BBased on: http://www.cisco.com/en/US/docs/wireless/technology/hi_avail/N1_High_Availab...

edwardzeng · 09-11-2011

Hi,Is there any potential DHCP black hole in the VLAN Select for WLC 7.0.116.0?Like if you put 3 different subnets into one group interface, if one of their dhcp ip pool is full. As WLC is running round-robin load-balanced. How does the WLC know that...

edwardzeng · 01-12-2011

Hi,We got the ACS 5.1 VMWare.We try to send the username only to proxy radius after ACS strip the Prefix\Suffix realm.But ACS 5.1 could not strip the prefix\suffix in Peap Authenticaion Method.If we put NAS Authentication Method to PAP_ASCII then ACS...

edwardzeng · 05-11-2022

Hi, May I know how did you fix your RDP to 802.1x problem? We have the same issue. Best regards,Ed

edwardzeng · 03-21-2019

Ok. it was fixed by using the version 2 API instead, there are different to version 1.x, then it works. after that, I still need to reboot both admin nodes. curl -k -X DELETE https://username:password@<mntnode>/admin/API/mnt/Session/Delete/All

edwardzeng · 03-21-2019

Hi Anton, We have this same issue one our distribute mode ISE nodes. Just wonder how could you manually pure the active session from the primary and secondary mnt nodes? I tried the curl command but did not seems that works. curl -k -X DELETE https:...

edwardzeng · 08-09-2017

under Prime 3.1.5, it changed to Admin/Dashboards/System Monitoring Dashboard/Overview/System information.

edwardzeng · 05-01-2017

Hi Per, Just wonder how was your FUS upgrade on the HA SSO WLC? Did you need to unpair them first? We are going to upgrade our HA SSO 8510 cluster to FUS 2.0. Many thanks, Edward

Member Since	‎05-05-2008 12:38 PM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	45
Total Helpful Votes Received	41

User Statistics

User Activity

ISE 2.3 iPSK end point devices managment by external DB

How EEM send email in VRF environment?

N+1 5508 WLC failover test

Is there a DHCP Black Hole in Cisco WLC 7.0.116.0 new feature Vlan select?

ACS 5.1 failed to strip Username Prefix\Suffix in Peap?

Re: Problem 802.1x with RDP connexion

Re: Cisco ISE 2.3 base license consumption (Radius accounting)

Re: Cisco ISE 2.3 base license consumption (Radius accounting)

under Prime 3.1.5, it changed

Hi Per,