About jeroenhermans

jeroenhermans · 02-22-2017

Hi, We've got CMS 2.1.3 (Single box deployment) with CUCM 11.5.1SU2 and expressway 8.9. I am trying to allow outbound calls to be routed from our CMS to CUCM for further processing. There is a secure sip trunk between the 2 and I am able to call fro...

jeroenhermans · 02-13-2017

Hi, We have some UCSB-F-FIO-785M cards from B200 M3 servers and are wondering if they would also work in B200 M4 servers? I can only see the newer type cards in the B200 M4 pdf but was wondering if anyone tried it (http://www.cisco.com/c/dam/en/us/pr...

jeroenhermans · 04-15-2014

Hi, We're trying to migrate all our DN's from E.164 to +E.164 on our CUCM 9.1.2SU1.It seems that for the meetme patterns I cannot do this as it's saying I cannot use the +Any help? Thanks, Jeroen

jeroenhermans · 02-14-2014

Hi,We're planning to upgrade our CUCM from 8.5 to 8.6.2 and I am finding some contradicting information with regards to upgrading the jtapi client on the PG's so that they match the CUCM version. So just wanted to check with you guys what would be th...

jeroenhermans · 09-12-2013

Hi,We currently have 2 x 2960s switches that are live and have an erherchannel between them. To free up the ports used by the etherchannel, to increase the bandwidth between the 2 and to make it easier to manage them, we have decided to stack them to...

jeroenhermans · 02-22-2017

Hi Patrick, Yes indeed, interface b is configured for call bridge use and interface c is configured for turn use. I have now added the fqdn of the turn server to the secure sip trunk on CUCM like Oleksandr has suggested. This seems to work. the CUCM...

jeroenhermans · 02-22-2017

Hi Patrick, Thanks for your reply. How can I define what interface to use? Thanks, Jeroen

jeroenhermans · 02-13-2017

Hi Kirk, Thanks for your reply. I think you have misunderstood my question. I am asking if the UCSB-F-FIO-785M is compatible with the B200 M4? Thanks, Jeroen

jeroenhermans · 05-25-2016

Hi, Were you able to resolve this issue? Thanks, Jeroen

jeroenhermans · 04-15-2014

Hi Guys, OK, thanks for your help. Indeed it seems + or \+ is not supported.I have done it with a translation pattern now so that is OK. Thanks, Jeroen

Member Since	‎01-04-2006 11:20 AM
Date Last Visited	‎03-15-2024 12:01 AM
Posts	345
Total Helpful Votes Received	47

User Statistics

User Activity

CMS (Cisco Meeting Server) 2.1.3 outbound call issue

UCSB-F-FIO-785M Fusion io compatible with B200 M4?

CUCM 9.1.2SU1 assign +E.164 numbers to meetme patterns

CUCM Upgrade : Pg Jtapi upgrade question

adding stack modules to live switches

Hi Patrick,

Hi Patrick,

Hi Kirk,

Hi,

Hi Guys, OK, thanks for your