Steve Coady
Level 1
Level 1
Member since ‎03-29-2005
‎12-14-2020

User Statistics

  • 506 Posts
  • 1 Solutions
  • 4 Helpful votes Given
  • 15 Helpful votes Received
Recent Badges
10 Helpful Vote
1 Accepted Solution
1 Helpful Vote
50 Replies
20 Replies
10 Replies
5 Replies

User Activity

OUTSIDE-DIST#sh proc cpu | ex 0.0Core 0: CPU utilization for five seconds: 85%; one minute: 86%; five minutes: 88%Core 1: CPU utilization for five seconds: 83%; one minute: 93%; five minutes: 83%Core 2: CPU utilization for five seconds: 100%; one min...
All We have a remote site (c1111) that has a S-2-S vpn to ASA (asa9-12-4-4-smp-k8.bin). topology: Remote site: Cisco 1111 - Internet (vpn) - ASA - Internet The VPN works but access to Internet does not. Remote-Site config crypto isakmp policy 1encr 3...
All We are experiencing catastophic weirdness with failover between Pri/Sec. While on Pri, the "no failover" command was run.    I lost connectivity to Primary    Internet connectivity was lost. I think this was because Prim/Sec both thought they sho...
All I am an NE in a large, complex network that is getting larger fast. Recently we built a new site and while checking routing to make sure we have redundancy built in, I came across the following while looking at eigrp top.  sh ip eigrp topology 10...
All   We are beginning to use ikev2 for site-to-site vpn's My current vpn's use the following group-policy:   group-policy DfltGrpPolicy attributes vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless webvpn  anyconnect ssl keepalive none  anyconnect ...
Community Statistics
Member Since ‎03-29-2005 01:28 PM
Date Last Visited ‎12-14-2020 07:42 AM
Posts 506
Total Helpful Votes Received 15
Helpful Votes From
Helpful Votes Given To