Hello,there`s a 4500 Switch with High Cpu Load: #show proc cpu sorted | ex 0.0CPU utilization for five seconds: 88%/3%; one minute: 92%; five minutes: 93% PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process  41  1147238344  45841172...

Hello. Given the following topology:R1#SW1-----           |          SW3--Host           #          SW4--Host           |R2#SW2-----R1 and R2  are connected via an Ethernet dot1q Trunk to SW1/SW2. On SW1/SW2 there're static access ports which connect...

Hello,are there any limits according to the maximum number of routes for that router? http://www.cisco.com/en/US/prod/collateral/routers/ps9343/data_sheet_c78-441072.html  shows in the Section Performance "Scalability to 1,000,000 IPv4 routes or 500,...

Hello,i'm interested in a good design / best practice regarding  the connection of a multihomed Internet Customer with an own public AS (AS1 and Router R) who expects to receive the full BGP Routing Table in the following topology towards a separate ...

Hello,i want to aggregate the following L3 Ethernet Fibrelinks in a central site. It´s planned to use BGP an Routing Protocol:13 x 1 Gbit10 x 100Mbit  3 x 10 Mbit 7x 10 Mbit (Backup links, with only 2 Mbit bandwidth)1-2 10GbitThat central site will b...