About Tammy Cox

Tammy Cox · 02-01-2018

Do the active auto-discovery flows count as a licensed flow? My understanding is that those are flows that have not been fully set up to become optimized or pass-through. If I am licensed for 2500 concurrent connections, do the active auto-discovery...

Tammy Cox · 03-28-2016

Looking to understand why I don't always see the PT reason noted correctly. Scenario: I have a WAAS at site A and a WAAS at site B. Both run 5.3.1 code. Neither go into TFO overload. I have a policy configured with action = Passthrough for destinat...

Tammy Cox · 02-09-2016

Why does the SRE module not indicate it has received any Pause request from the router? Are the ge_tx_interrupts/ge_rx_interrupts on the SRE module interface of great concern? The Pause Outputs from the router on the SMx/x interface is seen in most o...

Tammy Cox · 02-09-2016

Has anyone configured the SRE module external interface for packet capture traffic? Scenario-- Router gig0/0--->Ethernet TAP--->WAN The router has an SRE running WAAS software. The Ethernet TAP is a passive 3-port switch that will replicate the tra...

Tammy Cox · 01-28-2015

Has anyone successfully implemented TACACS authentication TO the CM GUI? I have the CM configured for TACACS authentication to the WAE devices GUI and CLI - that works fine with the admin role assigned. It does not work for authentication to the CM...

Tammy Cox · 04-06-2016

Hi, Yes, I checked the B side. Both sides showed the same behavior. I expect to see PT App Cfg as the reason, but not both PT App Cfg and PT In Progress. I also verified that the policies were correct on both WAAS. Here is the snip of the config s...

Tammy Cox · 02-10-2016

Jorge, I will open a TAC case on this given that this is a systemic symptom in every ISR G2 router deployed with SRE module running the WAAS software. I expect to see that the SRE module is receiving the pause frame from the router and that it will ...

Tammy Cox · 02-10-2016

Jorge, Any idea how the external interface is referenced? would it be the Eth1?

Tammy Cox · 02-10-2016

Jorge, I have now looked at all 97 SRE modules in production. Router platforms are ISR G2 2911 & 2951. The 2911's have the SRE-700 and the 2951's have a SRE-900 or SRE-910.Here is what I've found, which is irrespective to any SRE TFO overloads and ir...

Tammy Cox · 06-19-2014

Final Update and resolution: TAC was able to review all the logs and find 7 optimization policies that 'failed' thereby causing the device group setting for the Optimization Policies to drop and revert to "Select a device group".Of those 7 policies,...

Member Since	‎07-23-2012 08:00 AM
Date Last Visited	‎06-15-2018 12:10 AM
Posts	26
Total Helpful Votes Received	4

User Statistics

User Activity

WAAS active auto-discovery flows

WAAS PT App Cfg versus PT In Progress

Pause Outputs from Router to SRE Module running WAAS 5.3.1

Using the SRE Module External interface

AAA TACACS for CM GUI login authentication?

Hi,

Jorge,

Jorge,

Jorge,

Final Update and resolution: