dave dave
Level 1
Level 1
Member since ‎01-17-2011
‎08-18-2017

User Statistics

  • 78 Posts
  • 0 Solutions
  • 68 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
70 Discussion Posts
40 Discussion Posts
40 Replies
5 Discussion Posts
50 Discussion Posts
30 Replies
30 Discussion Posts
60 Discussion Posts
20 Discussion Posts
First Discussion

User Activity

hi! if I've a few questions about vlan1 switch1) can I shutdown the vlan 1 in a flat network, and at the same time able to manage the switch remotely? Otherwise, how do I enable remote management?2) will there be any downtime to the user if I shutdow...
hi! In our network, we've 2x L3 4506 switches running HSRP and with a couple of edge switches connected to these 2 core switches. I'm trying to turn on Port spanning for a few VLANs and trunk/access ports in one of the L3 4506 to be monitored in a de...
hi! when we subscibe to the internet with static public IP address (WAN(CE/PE) & LAN pool), do we need to tell the telco to set the internal LAN interface IP address in the Telco router/marc?Eg. if i'm assigned a public LAN ip range of 2.2.2.0/29.I'm...
hi! I noticed that there is an issue with my call forwarding in call mgr. Whenever I do a call forwarding the external number caller id will be appended to our internal prefix. eg. internal extension is in this format 6110xxxx, when the external user...
hi! i've a few sites with setup as option 1 in the diagram attached, whereby i've a WAN vlan with FW, Telco MPLS router and an ASA(backup link) connected to this WAN VLAN. The FW and ASA will have a route back to the internal netowk of 10.1.1.0/24 an...
Community Statistics
Member Since ‎01-17-2011 09:43 AM
Date Last Visited ‎08-18-2017 04:03 AM
Posts 78