About Peter Vine

Peter Vine · 08-02-2017

Hi chaps, Trying to upgrade the FPGA and PSU firmware on my C240 M3 servers via the HUU 3.0.3a utility however it does not have an option for upgrading the firmware on the FPGA and PSUs. Over time, I've had to replace PSUs due to failures which mea...

Peter Vine · 08-02-2017

I haven't removed power or re-seated the PSU since the update. Would I need to do that to jog the CIMC into seeing the FPGA firmware status?

Peter Vine · 08-02-2017

Here is what the CIMC log says when the server is powered off: Firmware Details: --- ComponentID: FPGA Status: NotRequired Version: C8061554 Latest: C8061554 And here is what it says when it is powered on: --- ComponentID: FPGA Status: Required Ve...

Peter Vine · 08-02-2017

Hi Wesley, Thanks, I did that but when I power it back on and compile a tech support file it says that the FPGA and PSU still need firmware updates? Basically what the CIMC says when the server is powered off differs to what the CIMC says when the...

Peter Vine · 08-02-2017

Thanks Daniel, Great guide but it doesn't seem to show how to upgrade the PSU even though this is mentioned below??? Can someone clarify how this is done?

Peter Vine · 01-13-2017

I then tried this:[root@localhost Desktop]# sh create_util_usb_huu_v2.sh /dev/sdb /home/prestwick/ucs-c240-huu-3.0.1c.iso syslinux-4.05-13.el7.x86_64/dev/loop1ucs-c240-huu-3.0.1c.iso/dev/loop1mount: /dev/loop1 is write-protected, mounting read-only##...

Member Since	‎10-09-2012 07:38 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	8
Total Helpful Votes Received	1

User Statistics

User Activity

C240-M3 FPGA & PSU firmware upgrades.

I haven't removed power or re

Here is what the CIMC log

Hi Wesley,

Thanks Daniel,

Re: Cisco Standalone C-Series Host Update Utility USB Image Utility