Peter Vine

I haven't removed power or re-seated the PSU since the update. Would I need to do that to jog the CI...

Here is what the CIMC log says when the server is powered off: Firmware Details: --- ComponentID: FP...

Hi Wesley, Thanks, I did that but when I power it back on and compile a tech support file it says th...

Thanks Daniel, Great guide but it doesn't seem to show how to upgrade the PSU even though this is me...

Hi chaps, Trying to upgrade the FPGA and PSU firmware on my C240 M3 servers via the HUU 3.0.3a utili...

I then tried this:[root@localhost Desktop]# sh create_util_usb_huu_v2.sh /dev/sdb /home/prestwick/uc...

Using what its given me as the destination of the USB key I did this:[root@localhost Desktop]# sh cr...

Its giving me:[root@localhost Desktop]# fdisk -lDisk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 ...

I'm updating the firmware on roughly 90+ C240-M3s all of which are running 1.5f and aren't compatibl...

Problem appears to be when you launch it it just uses /dev/loop0 and ignores /dev/sdb1. When you unm...

Also running it with CENTOS 7 minimal using the extra tools suggested above and its saying:## Creati...

I don't want to be a party pooper but what about all those out there who aren't whizzes with Linux?A...