I just started getting this on one of my 2960x-48FPD-L. I had version 15.2.6E1 running, with 15.2.7E3 in flash waiting for reboot during maintenance cycle. Apparently the switch lost power overnight, and on reboot loaded the new image, whereupon I s...
Really simple question for a newb:
I have a single web server that I want to share on a static IP. I'll handle the ports via ACL instead of at the NAT level.
Inside Address: webhost-in 192.168.28.11
Desired Outside Address: webhost-out 1.2.3.4...
I am trying to get a simple solution in place here, but not entirely sure how to go about it.
Two Nexus 5548UP and a single 2248TP. I have it working on one of the Nexus switches as fex 100, but need to get it set up on the second Nexus.
Silly i...
Trying to figure out how to create a U-Turn so that a web server we have on our DMZ is accessible to all hosts (whether on the inside or another host in the DMZ) via its public IP. See attached crude drawing.
We have split DNS for this particular ...
This fixed it for me. IP routing enabled with default route set correctly (on a /30 network). I could ping an IP, but not a hostname. I had name-server and domain-name set up, but not domain-lookup. That was a little odd, as I never use that on any o...
Thanks for the input. I was suspecting that was the case (given that the antenna is internal), but anything wireless (including my remote control) mystifies me so I figured I'd ask just to make sure.Thanks!
