irakli_n

irakli_n · 10-08-2018

Hello everybody, I have 1000V (or similar) router which has legs using subinterfaces in 10 or more V...

irakli_n · 10-01-2018

Hello everybody, Hope you can point me to the right direction. I am trying LISP after my original at...

irakli_n · 09-30-2018

Hello I am looking into more complicated SSL VPN deployment with Cisco 1000v. Here are details 1000v...

irakli_n · 09-30-2018

Guess no one has this problem.... Sigh...

irakli_n · 09-27-2018

Hello everybody, I came into realization that our deployment of extending L2 with L2TPv3 inside IPSe...

irakli_n · 09-17-2018

Pieterh, Thanks for reply. After several trial and errors here is the config what made it work. - DH...

irakli_n · 09-12-2018

Setup/background: 2504 WLC: 3 interfaces connected, 2 in use, three 2700 AP. Interface 1 on WLC is m...

irakli_n · 07-05-2016

I's say - if if L2TPv3 tunnel is up and passes traffic (this is your case) then problem is most like...

irakli_n · 07-04-2016

Yes. 897 is unsuitable for this deployment. You need older 800 series box, I use 892. I understand h...

irakli_n · 06-06-2016

Aha, that's what I thought regarding SAs. I can include the multiple subnets in the above scenario, ...

irakli_n · 06-06-2016

Here is the question: there are two devices - Cisco 1921 and Cisco 800 series boxes. Both of devices...

irakli_n · 05-08-2014

Anybody? Opened ticket #630128425, no response from Cisco yet..

irakli_n · 05-01-2014

Patrick, Which models and which IOS did you use? I have exactly the same problem - 897 box with 15.2...

irakli_n · 04-30-2014

Sigh... after 7 hours battling coming here because I've exhausted all my options to find an answer f...

irakli_n · 08-27-2013

Here is one basic question. Is it possible to bridge two networks over IPsec tunnel?I basically want...

Date Registered	‎11-06-2003 03:10 PM
Date Last Visited	‎10-15-2019 10:52 AM
Total Messages Posted	32
Total Helpful Votes Received	5

How to stop routing between subinterfaces without using firewall feature?