Hi All,I hope to be there someone to quickly help me with the below issue.We have to change a network card of one sever that is connected to two Nexus 5000 switches. Our Storage environment is a multihop FCoE => each NEXUS 5000 (where the hosts are a...
Hi All,I have configured 1 vPC's between 2 Nexus 5596 and 1 stack C3750 switch. The links in the stack are distributed over both members.Gi1/1/1 -> Eth 1/44 NX 5596-02Gi 2/1/1 -> Eth 1/45 NX 5596-02Gi 1/1/2 -> Eth 1/46 NX 5596-01Gi 2/1/2 -> Eth 1...
Hello,I manage one CSC from one of my customers. All ok with this module except updates for PhishTrap pattern.I reset and restarted the module. CSC have valid licence and no warnings about Maintenance Agreement.Pls help me with some ideas about what...
Thank you for your help!I have re-activated the zoneset and the new WWN's was used.Is no full zoneset configuration.I have one more question - on the Nexus 7K switch if i initiate the 'show run' i see after the 'zoneset activate name Zoneset_VSAN3 vs...
On the Nexus 5K is used fc-alias. In Nexus 7009 are mapped directly the WWN's to the zones.Is not used enhanced zoning.How can be activated the zoneset without disruptions ?How can be commited the changes on the nexus 7K switch ?Below are the request...
Hi,We implementing OTV between two DCs, but the OTV adjancency don't come UP. In one DC is NX7Ks with SUP1 and in the second DC are NX-7Ks with SUP2.It's possible to have problems because the OTV should work between equiments with different superviso...
Hi Robert,I Have the same issue like Tiwang with SSM-10 modules. The modules it's running with last version of E4 - 7.1.(6) but i can't update to the last signatures.I am stucked to S689. I tried to upgrade from local server or online but did not su...
