Hello everyone.During COVID-19 VPN madness, I'm stuck with EasyVPN for one customer and can't figure out how to solve overlapping subnet problem.They have Cisco 2801(SEC/K9) and I've configured split tunnel with Cisco VPN Client software for remote u...
Hello everyone.
I have strange problem with ASA5525.
ADSM periodically asks for relogging on already authenticated session (user/password input window pops up). The behavior is completely random. Sometimes it happens within several minutes of inact...
Hello everyone.
I have several WAP321 access points deployed in the network as standalone units and they're working well. Now I'm trying to set up centralized RADIUS server authentication (WPA2-Enterprise) for wireless users using FreeRADIUS.
WAP321 ...
Hello.I've tried browsing the documentation, but it is vast and with my little knowledge of multicast world, hard to understand. Need to somehow pass multicast traffic to IPTV STB device on my LAN.Here is a setup:ISP PE (QinQ sub with ip pim sparse-m...
Hello everybody.I'm having problem when connecting to router via VPN client. Upon connection I receive route for 172.16.0.0/16 network by split tunneling. Also I have a route to one specific host lets say 172.16.15.20/32 via different gateway with wi...
I am exactly in the same turmoil. This is 13 year old account with all my previous activity and web-help@cisco.com is not helping me in changing the email. They keep replying with copy/paste answer how to transfer my certification history to the new ...
Thank you for the reply Cristian. I feared one to one host mappings would be the only workaround and hoped EasyVPN might have some other solution for that.They have very random addressing allocations. Some hosts are from first /27, then some more hos...
Hello, thanks for the reply.Your provided configuration is forwarding ports, while I need static NAT mapping 1:1 for whole /24. For example I can send fake subnet 192.168.43.0/24 to remote users (so it does not overlap with their LAN) and then map it...
I know this is an old thread, but I found one workaround yesterday. Had exactly the same problem with two 4500-X switches. One switch would advertise summary static route pointing to Null0 as external and another one advertised it as internal route. ...
Thank you for the reply.Connectivity problems are ruled out, simultaneous CLI connection is up and well. I also think this has to do with HTTPS session timing out. Is there any configurable keepalive service in ASA OS for ASDM sessions?
