About Tobias Feichtinger

Tobias Feichtinger · ‎01-18-2019

Your right but in the new 8.8MR2 Beta there is a new Feature added: WGB on COS Aps Mesh Support on All Indoor/Outdoor wave APs including ME BLE Dongle Solution 4K SSID Scale i havent tryied this. You can request access to the Beta via the following Link: http://cs.co/88Mr2InterimAccess Regards

Tobias Feichtinger · ‎11-27-2018

Hi Is 8.5.MR4 still on the roadmap for end Nov 18?. Is there a date when it is public to CCO? I Requested access to the Beta put dosent get an answer. We would like to make testing with 8.5.MR4 with 8540 Controller for our big maintenance windows in Feburar, where we move from 8.2.MR7 to 8.5.MR4 with about 3500 APs.

Tobias Feichtinger · ‎05-02-2018

me too :)

Tobias Feichtinger · ‎03-29-2018

@alberto.capecchi would be nice if you can share the GUI Application. Thanks Feichti

Tobias Feichtinger · ‎04-13-2016

Hi Radha I have opend a TAC Case today with the Case Number: 638750053 So you can pick the case to you and can contact me.

Tobias Feichtinger · ‎04-11-2016

Hi i have applied on our ACS 5.8.0.32 Server the new Patch 2 hostname/admin# show version Cisco Application Deployment Engine OS Release: 2.2 ADE-OS Build Version: 2.2.2.015 ADE-OS System Architecture: x86_64 Copyright (c) 2005-2015 by Cisco Systems, Inc. All rights reserved. Hostname: hostname Version information of installed applications --------------------------------------------- Cisco ACS VERSION INFORMATION ----------------------------- Version : 5.8.0.32.2 Internal Build ID : B.442 Patches : 5-8-0-32-1 5-8-0-32-2 After the successfully installation of the patch i made the reboot of the appliance and all services were up and running. I could login to the ACS Server bot when i want to open the report page i get only an blank/ white screen. See the screenshot i have attached. capture.png I tried it with different browsers ( Firefox / Internet Explorer /Chrome), all the same issue. Then i removed the patch again and restart the services. Then the reports page is now functional again. Does someone else have got the Problem too ?

Tobias Feichtinger · ‎04-07-2016

Hi William At the Moment we have got only about 40 Accesspoints running with this software. The maintenance window is today afternoon then i will upgrade the rest of 2300 aps to the new software. From Saturday until today we haven't got reported any issues at our daily business.

Tobias Feichtinger · ‎04-03-2016

Thank you for the Updated. I have upgraded 2 WISM 2 Controller yesterday. And the rest next week.

Tobias Feichtinger · ‎04-01-2016

Hi Javier is there an delay for the publish ? because at the moment i can't find the release on the homepage :(.

Tobias Feichtinger · ‎03-30-2016

Do you know when this week. ? We will have got a maintenance windows next week on the 7.4.2016 and i would like to update directly to 8.0.130 for 10 WISM2 Controllers with about 2500 APs. I Have got running on one WISM2 the Beta 8.0.122.44. And would like to upgrade this bevor the maintenance window. For final Testing. Feel free to Contact me. Regards

Tobias Feichtinger · ‎02-29-2016

Hi can you seperate the list again so that we can see which bugs were fixed in the newer versions. I would like to know which bug is new fixed between the 8.0.122.44 and the 8.0.122.50

Tobias Feichtinger · ‎02-03-2016

Sorry but this Accesspoint is not supported. See the releasenotes: http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn74.html You need at least Version 7.6 to support the 3702 for the UX Version i dont find anything in the releasenotes. But for the 2702 with the UX Version the minimum release is 8.0.110.0 so it could be the same for the 3702I-UXK9 Hope it helps.

Tobias Feichtinger · ‎12-14-2015

Here the same. Upgraded an 2960S Stack with two members to c2960s-universalk9-tar.150-2.SE9.tar and then ssh dont work any more. On console i see these nice log messages. Dec 14 20:47:49.612 MET: %ENTROPY-0-ENTROPY_ERROR: Unable to collect sufficient entropy Dec 14 20:47:58.493 MET: %ENTROPY-0-ENTROPY_ERROR: Unable to collect sufficient entropy (Switch 2) Now i will try the 15.2.2.E3

Tobias Feichtinger · ‎04-10-2015

Hi I have got the same error at our 2.2 Version.

Tobias Feichtinger · ‎03-11-2015

I tried it to install the pi221_20150131-27.ubf over the pi221_20150210_01.ubf but then i get an error: An error occurred while uploading file: Patch group id pi221_POODLE_20150131_01 of current ubf is already existing in uploaded ubfs. Upload is not allowed. This is a good question how to handel it.

Tobias Feichtinger · 01-18-2019 06:34 AM

Your right but in the new 8.8MR2 Beta there is a new Feature added:WGB on COS ApsMesh Support on All...

Tobias Feichtinger · 11-27-2018 01:06 PM

Hi Is 8.5.MR4 still on the roadmap for end Nov 18?. Is there a date when it is public to CCO? I Requ...

Tobias Feichtinger · 05-02-2018 02:28 AM

me too :)

Tobias Feichtinger · 03-29-2018 08:33 AM

@alberto.capecchi would be nice if you can share the GUI Application.Thanks Feichti

Tobias Feichtinger · 04-13-2016 01:24 AM

Hi Radha I have opend a TAC Case today with the Case Number: 638750053 So you can pick the case to y...

Tobias Feichtinger · 04-11-2016 12:57 PM

Hi i have applied on our ACS 5.8.0.32 Server the new Patch 2 hostname/admin# show versionCisco Appli...

Tobias Feichtinger · 04-07-2016 05:31 AM

Hi William At the Moment we have got only about 40 Accesspoints running with this software. The main...

Tobias Feichtinger · 04-03-2016 12:56 PM

Thank you for the Updated. I have upgraded 2 WISM 2 Controller yesterday. And the rest next week.

Tobias Feichtinger · 04-01-2016 07:34 AM

Hi Javier is there an delay for the publish ? because at the moment i can't find the release on the ...

Tobias Feichtinger · 03-30-2016 02:07 AM

Do you know when this week. ? We will have got a maintenance windows next week on the 7.4.2016 and i...

Tobias Feichtinger · 02-29-2016 02:56 AM

Hi can you seperate the list again so that we can see which bugs were fixed in the newer versions. I...

Tobias Feichtinger · 02-03-2016 07:28 AM

Sorry but this Accesspoint is not supported. See the releasenotes: http://www.cisco.com/c/en/us/td/d...

Tobias Feichtinger · 12-14-2015 12:01 PM

Here the same. Upgraded an 2960S Stack with two members to c2960s-universalk9-tar.150-2.SE9.tar and ...

Tobias Feichtinger · 04-10-2015 06:05 AM

HiI have got the same error at our 2.2 Version.

Tobias Feichtinger · 03-11-2015 04:49 AM

I tried it to install the pi221_20150131-27.ubf over the pi221_20150210_01.ubf but then i get an err...

Date Registered	‎02-19-2013 06:57 AM
Date Last Visited	‎02-18-2019 09:31 AM
Total Messages Posted	19
Total Helpful Votes Received	15

Re: Access Point in Workgroup Bridge Mo...

Re: 85MR4 Interim Build Availability

Re: 8.2MR7 Interim Availability

Re: How To Add Wireless Guest User via ...

Hi Radha

ACS 5.8.0.32.2 Cumulative Patch 2 Repor...

Hi William

Thank you for the Updated. I

Hi Javier

Do you know when this week. ?

Hi

Sorry but this Accesspoint is

Here the same. Upgraded an

HiI have got the same error

I tried it to install the

Re: Access Point in Workgroup Bridge Mode