About attavit_reungratanakul

attavit_reungratanakul · 08-20-2013

Hi, does anybody try OTV with HSRP in the same group between two sites ? (Active/Standby)from http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI_1.html#wp1236403If I disable igmp snooping on 7k (OTV), solution on diag...

attavit_reungratanakul · 05-17-2012

I want to use FCIP 10 Gbps. Does DS-X9708 Support FCIP ? or if you have another solution please tell me.lastly if I use DS-X9708 FCoE. How about the Distance Limitation.Thank you.

attavit_reungratanakul · 05-14-2012

First Question about the FCoE Direct Attach If I have EMC Storage with FCoE interfaces and I want "FCoE Direct Attach" to FI-6248 "Without Upstream Switch" (MDS or N5K). Will it work ? if I "Enable Default Zoning" in UCS ManagerSecond Question about ...

attavit_reungratanakul · 11-17-2011

UCSM 2.01q with 6120XPI can create port-profile using . (dot) for example "VLAN30-192.168.1" but it cause some warning message (picture below)so I try to change the name to VLAN30-192-168-1 it can work just finemy question is Can I use . (dot) in my ...

attavit_reungratanakul · 09-16-2011

I have a problem with C210 M2 with 2 PCIe HBA. The problem is OS (RHEV) report with error log about the Problem with HBA card (Fibre Channel Traffic Disruption) cannot connect with FC StorageWhen I get the log from SEL.Time Severity ...

attavit_reungratanakul · 05-14-2012

Please refer to UCS Version 2.02Thank you

attavit_reungratanakul · 11-23-2011

Robert,Thank you for your effort.but Do you have the plan to fix this issue in the future ? ( I want information to tell my customer )Best Regards,Attavit

attavit_reungratanakul · 11-18-2011

Robert,I wait about an hour until warning fault become critical fault as the last screenshot I have sent to youWhile this issue happening I create the Port-Profile Client and push to vCenter. Yes, it appear in the vCenter but the problem is it cannot...

attavit_reungratanakul · 11-17-2011

Hi Robert,Pls check private message for the capture screen step by step about creating the port-profile (VM-FEX)There's different from create port-profile name with - (hyphen) and . (period) from UCSM view from the picture in attached file1. Create P...

attavit_reungratanakul · 11-04-2011

I have the same problem with Jeremy Waldrop but on 6120XPSetup with new the software 2.01q (upgrading and erase configuration)

Member Since	‎10-15-2009 09:47 AM
Date Last Visited	‎12-16-2019 01:34 AM
Posts	26

User Statistics

User Activity

OTV with same group HSRP between two sites

DS-X9708 Support FCIP 10 Gbps ?

Question about FCoE Direct Attach and VIC1240

UCSM VM-FEX when create port-profile name cannot use . (dot)

UCS C210 M2 Problem with HBA Card

Question about FCoE Direct Attach and VIC1240

Re: UCSM VM-FEX when create port-profile name cannot use . (dot)

Re: UCSM VM-FEX when create port-profile name cannot use . (dot)

UCSM VM-FEX when create port-profile name cannot use . (dot)

Re: iSCSI boot roadmap