Hi,I want to design a industrial network and I though in some IE4000-8S4G-E. This industrial switch has 8 SFP ports (downlink) and 4xSFP and 4xGe Combo (Uplink).Can I use the Uplink ports as downlink port and only have a one SFP as Uplink port? I thi...
Hi, We adquired a ISR 1100-4P (ISR1111-4P) and we activated the uck9 option in the ISR but we can't get the telephony-service command in cli. - Cisco IOS Software [Amsterdam], ISR Software (ARMV8EL_LINUX_IOSD-UNIVERSALK9-M), Version 17.3.3, RELEASE ...
Hi, I have a Cisco ASA 5506x and and Cisco CDA, integrated with AD and CDA Agent, to create firewall rules for each users to access some resources allow/deny. Now, I am going to renew this device for a new one Cisco Firepower 1010 NGFW and a need to ...
Hi, I have the following scenario: PC Windows 10 ---> Cisco ASA ---> External VPN Server PC(Windows 10 has embbeded VPN) to connect external server.I opened the ports in Cisco ASA, the NAT is configured fine for the internal network(inside) to extern...
Hi, I have a ISR1100-4P and I adquiere CME licences for this ISR. ISRCME#show license summaryLicense Usage:License Entitlement Tag Count Status-----------------------------------------------------------------------------uck9 (ISR_1100_4P_UnifiedCom.....
Hi Chris Deren,
Then the config of the current CUAC Enterprise edition clients of CUAC Enterprise edition v8.0.0.5; only I have to do the upgrade in the new machines and the config will be the same or I have to migrate the clients configs from old ...
Hi Slobodan,It's so strange. you have to talk with your telco (BRIs provider), to configure the BRIs correctly and your telco should say you how you have to configure the BRIs parameter in ISDN Link.If your SX20 continue ringing after pick up the cal...
Hi Slobodan,No at all, you can dial directly a H.323, SIP o H.320 from your SX20, you have't use this dial string.If your PSTN provider, put a PRIs or BRIs, in your ISDN link. You must say him that PRI or BRI should use vídeo and audio. For example i...
