About JESSICA Walsh

JESSICA Walsh · 11-14-2019

Thank you.

JESSICA Walsh · 10-02-2019

I disabled serial over LAN in the CIMC and the console port stopped spitting out garbage. I am still...

JESSICA Walsh · 08-07-2019

Does anyone know how to update the secondary PAN UDI in smart licensing? I deregistered the secondar...

JESSICA Walsh · 08-07-2019

We often use the console during upgrade. We do have CIMC working as well. Turns out you have to disa...

JESSICA Walsh · 07-17-2019

Does anyone know how to make the RJ 45 serial port on the back of a 3615 ise server not spit out gar...

JESSICA Walsh · 07-12-2019

How did you get your serial console to work? Ours just spits out garbage characters. i went into the...

JESSICA Walsh · 12-10-2018

I'm running version 16 cat3k_caa-universalk9.16.09.01.SPA.bin and have plugin version ofa-2.0.7-r3-c...

JESSICA Walsh · 12-07-2018

The "virtual-service" command is not there in my 3850. We have ipservices image. What is the trick t...

JESSICA Walsh · 10-16-2018

Does anyone know how to configure tacacs single-connect on an NXOS device? A Nexus 56128? Thanks.

JESSICA Walsh · 09-28-2018

How do you import ISE policy sets? They can be exported, therefore they have to be able to be import...

JESSICA Walsh · 03-07-2018

If the AP gets it's time reset every time it syncs with the WLC, that's great. But I HAVE NTP set in...

JESSICA Walsh · 03-07-2018

Our controllers are using NTP just fine. However, when looking at AP logs, the timezone, and possibl...

JESSICA Walsh · 12-20-2017

FW is on, AV is disabled and it sees it as disabled, but picks the right DAP anyway.

JESSICA Walsh · 12-20-2017

I have taken out my user name and some other info that I cannot post. this was a successful access w...

JESSICA Walsh · 12-20-2017

DAP record [ RECORD-NAME ]:((EVAL(aaa.cisco.grouppolicy,"EQ","XXX","string") and EVAL(aaa.radius["25...

Re: C5921 Smart licensing - Fail to send out Call Home HTTP message