How do I configure a 3550 to expand a network in a dorm room? Right now I just have a single Ethernet port in dorm room so I’m guessing it’s just giving me a single access port. I want to connect that port to a 3550 so I can have multiple access por...
Im not sure this is even possible and if it is how to configure it but take the following setup...
PE - - CE 4500 - - LAB 3750.
Lab wants to create a VRF that will passthru the CE and land on the
LAB3750
The WAN circuit terminates on the
4500
and typ...
I have a 3650-24PD with 2 x 1GB and 2 x 10GB, interface are as follows. gi1/1/1,gi1/1/2 , Te1/1/3 & Te1/1/4. Should I be able to use the last two 10Gb ports as 1 GB or are they only 10Gb usable? If I can use them at 1 GB what is needed in or...
For the life of me I cannot find on CCO if the following hardware requires T train code or not. I have one each.. VWIC3-4MFT-T1/E1 in a 3925 router and VWIC3-2MFT-T1/E1 in a separate 3925 router. Can someone tell me if so or where on CCO I can fin...
So if I connect 3550 to wall jack that will be vlan 1 on the switch. Your saying all I need to do is configure all the other ports as access on vlan 1 and it should work?
Your response is confusing. you first say you can only use 1 gb or 10 gb but than say you can use both? The link appears to represent that on can not use a 1gb sfp in the 10gb port? Am i interpreting that correctly?
