About Kimberly Adams

Kimberly Adams · 05-03-2012

Hey Everyone,I know the white papers say that the RPS 2300 supports the 3750-E series and the 3750 series, but we have 3750-G and -X series. Wanted to make sure that these switches are supported and if we need anything special?Thanks,Kimberly

Kimberly Adams · 01-30-2012

Hey Everyone, I have a really odd requirement for a NAT and then a NONAT on my firewalls.One interface on our ASA 5510 version 8.2(1) connects into our vendor's network and they only allow for one address to be allowed through the firewall. This all...

Kimberly Adams · 06-22-2011

Hey Guys,I am struggling with trying to resolve something that someone else setup. Here is the scoop:I have a 2901 router at a remote location routing between two networks 10.41.69.X and 192.168.20.X. They are already have a NAT setup in the follow...

Kimberly Adams · 05-19-2011

Hey Everyone,I am configuring AAA with RADIUS on our remote ASA firewalls. This is pretty straight forward, but I have some firewalls that this is not working on. I have upgraded the IOS image on the ASA 5510 to ASA804-K8.BIN on all of them. The s...

Kimberly Adams · 03-08-2011

Hello All,I have a site to site VPN between an ASA5540 and an ASA5510. The tunnel is up and passing traffic between all networks but one. The network that is not passing traffic is allowed in the object group for access on both sides, but when runn...

Kimberly Adams · 06-28-2013

Remco,I hate to aske the obvious here, but I have seen a lot of these kinds of issues being something simple like a speed/duplex issue in the configuration with the link partner. What is your interface configured for in this regard? Also, is the ot...

Kimberly Adams · 04-17-2013

Jeroen,Is this a remote access SSL VPN? If it is, are you tunneling everything and also do you get the proper DNS that would resolve the bookmarks to the correct server IP? This is the first place I would start looking.Thanks and Cheers! Kimberly ...

Kimberly Adams · 04-17-2013

Yes a site to site VPN would be the best way to set this up. You can restrict down to just the specific IP of their DC for their system to access and then deny all other traffic to that system. As for your users, you can allow only specific traffic...

Kimberly Adams · 04-10-2013

Kumar,If you have a single inside host that needs to be a different public IP address you can do something like this:static (Inside,outside) [PUBLICIP2] 192.168.0.25 netmask 255.255.255.255 Then setup some access lists for what it will need to do and...

Kimberly Adams · 04-10-2013

Kumar,Can you please post your configuration? Depending on how your configuration looks, you may be able to setup a static NAT for the one IP you wish to have a different address.Thanks and Cheers! Kimberly Please remember to rate helpful posts.

Member Since	‎03-09-2010 03:04 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	197
Total Helpful Votes Received	274

User Statistics

User Activity

Switches Supported with RPS2300

ASA 5510 NONAT/NAT

NAT Question?

AAA with RADIUS on ASA

Site-to-Site VPN issue

CRC errors increasing, but pingtests are 100% ok!

Use of bookmarks of resources which are located behind a S-to-S

VPN DMZ connectivity

Second Public IP on ASA 5510

Second Public IP on ASA 5510