About MehmetKaya

MehmetKaya · 12-29-2015

Hello, I want to play an message before calls to cisco ip phone and to learn how to do this? For example; Calls come to CUCM ext: 4040 Aim is play an message to caller before 4040 ring.

MehmetKaya · 08-04-2015

Hi All, I am not sure is it possible to write a command list that works every Sunday to reset any ISDN PRI interface?İf it is possible please share with me. Thanks.

MehmetKaya · 04-06-2015

Hello,Basicly there are 3 phones when any one hang off ( up the headset) call will goes to other both phones automatically. When anyone answer the calls the ohter phones can answer by hang off and join the call automatically. There 3 phones just of c...

MehmetKaya · 07-15-2013

Cisco hardphone is able to get the tftp ip address from dhcp server by option 150 parameter. There is not any problem with the cisco ip phone( hardphone).For cisco ip communicator( softphone) should get tftp ip address from tftp server automatically...

MehmetKaya · 06-26-2013

I want to collect the pre re recorded system greeting. Is there any way to get the pre recorded system greetings. I will collect and edit that wav.

MehmetKaya · 03-07-2019

I had same issue with 12.5.1862 version.

MehmetKaya · 03-30-2016

Hi I find the sollution for this purpose; I will write here with screens. Thanks for all.

MehmetKaya · 03-30-2016

Can I play a message for incoming calls prior to the phone ringing?? No, CUCM does not offer this feature. In order to do this, you would have a few options, as they require custom scripting, I will not cover them: TCL script, if you have H.323 or SI...

MehmetKaya · 02-08-2016

Hi All, I had same problem on my router (39XX - ssh enabled). I removed the below commend and router registered to CUCM. command: no ip domain name yourdomain.com

MehmetKaya · 01-04-2016

I have configured as below; For example I use 1908 as extension ( aim is say " your voice is recoded" before call goes to 1908. Call comes from PSTN as 3331908 I sent this to Unity connection with ( CTI route point as 3331908). I wrote a Forwarded R...

Member Since	‎01-15-2009 03:04 AM
Date Last Visited	‎06-15-2022 09:04 AM
Posts	158
Total Helpful Votes Received	9

User Statistics

User Activity

How to play an message before calls to Cisco ip phone with CUCM8.X and CUC 8.X

How to create a command that reset PRI interface peridiocally ( for example every Sunday) ?

How to configure there phones to call each other automatically ( barge, cbarge or any ohter features) ?

TFTP Option for Softphones

How to get unity connection the pre recorded system greeting?

Re: Prime Collaboration Provisioning sync stuck

Hi I find the sollution for

Can I play a message for

Hi All,

I have configured as below;