About Jason Ryan

Jason Ryan · 06-09-2017

Guys, Title sums it up. I want to see what people's experience has been using PCD for upgrades on servers/cluster that are geographically distant. In my case, I'm looking to upgrade a 8.6.2 cluster to 10.5 but there is about 9500 miles of earth betw...

Jason Ryan · 02-19-2016

Hello, Odd issue here. Using Cisco IP Communicator on Windows 7 laptops, users will remotely connect to our VPN (Cisco ASA with Anyconnect) and make voice calls. Heres the issue, the called partys (a DN internal to our company, AKA on our LAN) voice...

Jason Ryan · 09-14-2015

Hello all, I'm converting some Cisco 8945 refurbs from SIP back to SCCP using the auto registration method in CUCM. The problem is that after the phone downloads the SCCP firmware and reboots, it freezes when attempting to register. When the auto reg...

Jason Ryan · 04-03-2015

Hello, I am walking through the guide for the Cube line side setup.However, Im missing some of the commands from my router (Cisco 2921 with UC license installed). For instance, I do not have the option of: voice service voip extension cucmorvoice...

Jason Ryan · 02-04-2015

Hello, Issue: 7961s fail to upgrade to new firmware. Background: We have a 7961 that is registered to a remote call manager (VPN) and works without issue. We have an onsite call manager that we want to have the phone register with for time zones, et...

Jason Ryan · 06-13-2017

Chris, Simple enough solution! Thanks for the feedback! Jason Ryan

Jason Ryan · 02-22-2016

Mohammed, Thanks for the information! Ill try and check the Netflow, though the utilization shouldn't be maxed out. I definitely understand there's no QOS guarantee over the internet. Whats odd is that if a user connects to your VPN in Europe, the ...

Jason Ryan · 12-04-2015

I believe it was SCCP894x.9-4-2-8.loads though Im not certain. I ended up created a template so that any 8945 SIPs that were added to the system would then download the SCCP package (hardcoded in the template's load field). I would then bulk delete ...

Jason Ryan · 09-15-2015

In case anyone ran into this issue, I changes to the latest SCCP firmware available and the phones auto registered without issue. Reverted back to the 9-3-2-11 and the issue reoccurred. Jason Ryan

Jason Ryan · 04-03-2015

Aditya, I updated to 15.4 as mentioned and the commands were there. Thanks for the help. Jason Ryan

Member Since	‎09-11-2012 01:15 PM
Date Last Visited	‎09-05-2017 12:51 PM
Posts	60
Total Helpful Votes Received	5

User Statistics

User Activity

CUCM Upgrade with Geographically Distant PCD

High Jitter over Cisco ASA Anyconect

Cisco 8945 Freezes Auto-Registration

Cisco Cube LineSide Configuration

7961 Upgrade Error

Chris,

Mohammed,

I believe it was SCCP894x.9-4

In case anyone ran into this

Aditya, I updated to 15.4 as