Hello Dears,we have 2 Cisco C4507 Switches working As Core Layer, but the CPU Utilization is about 54% most of the time and sometimes it goes up to 70% or 80% also.could you please help me to sort out what is the problem and which services are causin...
Hello Dears,I have integrated ISE with Active Directory Domain and everything went fine, but when I tried to retrieve the groups from the Domain, I didn't get all Groups, many groups are missing and didn't appear on the ISE.is there any additional st...
hi,as per below white paperhttp://www.cisco.com/en/US/prod/collateral/ps4159/ps6409/ps5990/white_paper_c11_586100.htmlthe storage processor will have each port connected to different MDS.here am confused about the zoning configuration on MDS Switches...
Hello Dears,I'm trying to setup the Cisco ACS 5.2 to do Dot1x Authentication for clients on windows 7 & windows XP, I did all the steps but I couldn't create Service Rule, it's giving me an error message you can see it in the attached screenshot.afte...
Hello Dears,I need your help in this:I want to order Cisco CUCM 8.6 with the required Licemses and install it on MCS Server, but I couldn't do it on the Cisco Configuratio Tool, I don't know the right part number for the CUCM and the required License...
Hi Inyath,see below logs, there are mac move notifications always.the 2 mentioned VLANs 80 & 90 are Wireless VLANs, so I guess the movement is normal for those 2 VLANs.##################################################################################...
Hi Tarek,Thanks for your reply,I did restart the ACS Service and also I did the same configuration on ACS 5.3 version but i got the same issue.I tried to use both, the default network policy and a new one i did create it also same error, it's not giv...
