About sesoerensen

sesoerensen · 09-24-2013

I'm having an issue configuring mvpn in between a N7K and IOS Router.On the IOS router, i'm seeing this error message:DT-4-INCOMPATIBLE_TUNNEL_TYPE: Incompatible tunnel type in BGP update router_id:10.16.32.1 RD:10.16.32.1:13 type:1 tunnel_type:4; lo...

sesoerensen · 04-03-2014

Hi Todd, FlexVPN offers several VPN deployment models, so you might consider it a VPN frame-work.It might not be a term Cisco would use, but it offers all the various IPsec VPN deployments models under one umbrealla so to speak.If a Cisco representat...

sesoerensen · 04-03-2014

Hi Brian, How about configuring webvpn on the DMZ interface as well as on the Internet facing interface?Was in the same situation a few years back. It was easier to just configure webvpn on the guest-dmz interface. I'm pretty sure that the ASA is not...

sesoerensen · 04-03-2014

Hi Todd,How about deploying ISR routers connected to the 3750X switches at each site, and implement a VPN solution in between the ISR's - such as FlexVPN or DVTI/SVTI.Using a dynamic routing protocol would allow you to advertise routes within the "In...

sesoerensen · 10-02-2013

hehe, thanks mate ip pim ssm default - the saviour - and you.Beer's are on me!

sesoerensen · 10-02-2013

do you have "ip pim ssm default" on both IOS boxes?

Member Since	‎12-14-2006 10:10 AM
Date Last Visited	‎02-04-2019 01:31 PM
Posts	25
Total Helpful Votes Received	9

User Statistics

User Activity

MVPN in between NX-OS and IOS

Hi Todd, FlexVPN offers

Hi Brian, How about

Hi Todd,How about deploying

MVPN in between NX-OS and IOS

Incompatible tunnel type in BGP update