Hi Had problem with CPU utilization in cisco 4500 (CATOS). Every 2 minutes CPU utilization 60-70% for few seconds then decline to normal CPU utilization its about 15%. show process cpu sorted showed that K2AclCamMan Audit re process takes 60%. What t...

HiI configure intervlan on cisco 7613 (2vlans on one port).There are 2 vlans (vlan 10 and 20)Users in vlan 10 cannot communicate with users in vlan20.  I did successfully this configuration in many routers. But it doesn work in cisco7600 on ES+ card....

Hi all.I have problems with BGPSay there 2 routersr1---------r2In r1 I have route 192.168.0.0/24 with AS path (24721 65000 500)r2 have the same route with AS path (24720 24721 65000 500) I want that r1 advertise 192.168.0.0/24 to r2 with its own AS o...

Hello GuysI have one great problem. So We have Cisco SCE1010 and we have Monitoring Server. From Monitoring Server I wanna query SCE 1010 by this command:snmpwalk -v2c -c public 192.168.192.2In response: Error: OID not increasing: RFC1213-MIB::atIfIn...

Hi guys.SCE#show system operation-status                     System Operation status is WarningDescription: 1. Problem detected in a power supply2. HW failure due to line feed problemPort status is:Link on management port #1 is down2. HW failure due ...