Hi All,I am facing issues with passing kerbros authentication through the ipsec vpn between my sites it seems failing the same setup seems to work with MPLS vpn sites. I am having asa as my VPN device.Note : its is a new setup its not working from t...
Hi All,I want to check the count of the static routes configured in the MPLS PE router under various VFRs.I am using sh ip route vrf vrfname summary to check for each vrf .can anyone please update me on command to find the all configured static route...
Dear All, Is it possible to installa latest IOS in 4.1. series with ASDM in the WS-SVC-FWM-1 firewall module ???Please suggest on the latest IOS version support on the WS-SVC-FWM-1 firewall.Thanks in advance,Selva.
Dear all,I have nexus 2k fex connected to 5548 while issuing Shoe environment fex inlet temperature sensor is showing higher than outlet temperature . I am confused and expecting a suggestion from your side.Pl. find the attached snap.Thanks in advan...
Dear All,Have created a device group with some of my routers in LMS. But in topology that group is not available do need to enable something to get the user defined groups in the topology view ???thanks in advance ..Selva
Cheers Marcin thanks again i will try this out and post in this forum Can you confirm one more thing if change this tcp settings only on the client side will it do the job for me ?
Thanks marcin again,I have hardcoded the mss value to 1200 on my device to be on safer side still issue seems to remain. Can you suggest if anything else can be checked...
Bravo Marcin !Thanks for your immediate response. Can you tell me is there any changes required on the asa configuration to switch to TCP. can you guide how this can be done !!
Hi Vijay,If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you HTH,
