Hi all,Since we upgraded our 7010 Nexus switches to NX-OS 5.2(4) we see this message %DAEMON-2-SYSTEM_MSG: send/rx failed - syslog in the logifiles. We can't find any information in the current documentation.Can anybody help?Thanks,Roland
Dear allWe have 2 Cat 6509 connected to 1 Gbps Ethernet WAN Link. On each 6509 we use 2 Gbps IPSec SPA Encryption cards for Encryption. The encrypted traffic goes to a GRE Tunnel. This morning I found some error messages in syslog.%CONST_DIAG-SP-3-HM...
Hi all10 days ago I configured SSH on a 2610XM with IOS 12.3(16) IPsec 3DES feature set. Since then I recognize high cpu load (sometimes 100%) on that router. Is someone there who can give me a hint?Thanks in advanceRoland
Hi all,We connected two 2620 routers over a 2 Mbps link. The interfaces we use are G.703 controllers. The line is unstructured. The IOS installed on these routers are 12.1(5)T12 IP Plus 3DES. The data are 3DES encrypted and went through a VPN tunnel....
Hi everybodyWho can explain the difference between IPACCESSLOGP, IPACCESSLOGDP and IPACCESSLOGNP. This messages are displayed when the log option in an ACL is enabled.ThanksRoland
HiI've made the upgrade on that router to 12.3(16a) and now the load decreased rapidly. Obviously there is a bug in the other release.Thanks for your hint.Roland
Hi thanks for your answer. I checked the show process cpu already. But I forgot to post the result. Sorry. It's the SSH process which is the top process in the list. If I disable ssh the load goes to a normal value (approx. 30%). regardsRoland
