About lscd-fort

lscd-fort · 07-23-2014

I've recently configured a sip trunk with a sip provider (voipstreet) and have outbound calling to the pstn over the sip trunks working fine from internal ext's. I'm trying to map one of the did's that we have with the sip provider inbound to one of ...

lscd-fort · 01-28-2014

Hi, our current outgoing translation rules for our PRI look as follows -!voice translation-rule 85 rule 1 /842/ /40778XXXX/ rule 2 /835/ /40747XXXX/ rule 3 /836/ /407472XXXX/ rule 4 /837/ /407472XXXX/ rule 5 /838/ /407781XXXX/ rule 6 /839/ /407781XX...

lscd-fort · 01-24-2014

Hi all,Our ucs560 is working fine, today I needed to add a few new users, our internal user extensions use the range 820 thru 867 or so. I added the new extensions 880-884. Internal calls back and forth between these new extensions and other existing...

lscd-fort · 07-01-2013

Hi,Had a bizarre experience this past friday, system has been working fine, phones went down in the middle of the afternoon with no apparent cause. Realized I couldn't ping the uc560 within the lan. Connected to serial console of the the uc560, got t...

lscd-fort · 01-22-2013

I've configured liverecord for our user extensions, is it possible to configure liverecord for hunt groups? If users press the liverecord button for a call they receive via hunt group, they get a message saying that no mailbox exists for the (hunt gr...

lscd-fort · 07-24-2014

Thanks, agreed now that I listen to that message a couple more times, I guess that's not our ucs. Tried adding the 10 digit did instead of the 4 in the incoming dial plan, same result, 'party you're calling not available'

lscd-fort · 01-27-2014

Confirmed, outgoing caller id was the issue here. Had to add a dedicated caller id for these new extensions. Another issue may be a default outgoing caller id being also assigned to an extension.

lscd-fort · 01-26-2014

Based on a suggestion from another forum, think I've found the issue here, these new ext's don't have outgoing cid's specifially assigned like all other ext's do. So that could be answer here. Will confirm tomm am.

lscd-fort · 01-24-2014

Thanks David, replying to an old post, but I will check this. I didn't go back to this post back in July after a couple weeks went by. I'll take a look and see if the crash log file might still be there. I am still a little curious about this one.Tha...

lscd-fort · 01-29-2013

Thanks, I agree that's most likely the case here. So it seems an 2nd extension configured on the phone in this way, won't be able to use liverecord? Maybe you could confirm in your lab setup? Thanks

Member Since	‎01-27-2012 09:23 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	28

User Statistics

User Activity

uc560 sip trunk did inbound to extension

more than 14 outgoing translation rules

88x extensions can't access outgoing trunk

uc560 config erased

ucs500 - liverecord hunt groups?

Thanks, agreed now that I

88x extensions can't access outgoing trunk

88x extensions can't access outgoing trunk

uc560 config erased

Re: ucs500 - liverecord hunt groups?