Hello, I'm trying to implement the new Split Tunneling model supported in 8.0 release code, using OEAP ACL's and Network Lists, but I'm unable to achieve this goal.I'm seeing that whatever that I configure in OEAP ACL's, all traffic are "NAT-Routed" ...
Hi,I just install Cisco Security Manager 4.5 fresh installation on a Windows Server 2008 Standard R2 exclusive VM server for this application. All requeriments has been validated.I did not get any errors through the setup wizard, and it finish asking...
Hello,I'm trying to upgrade a fresh installation of Prime LMS 4.2 to 4.2.4.I already download directly the upgrade files from cisco.com to the server, and unzip all the files to the localdisk. Directory of disk:/ 1198459265 Nov 11 2013 18:13:25 Cisc...
Hi,I have a Cisco Prime Infrastructure 1.3 deployment with Catalyst 2960S switches. Switches are running IOS 15.0(2) SE2. All switches have SNMPv2 configured, and all appears to be fine. I'm migrating one switch to SNMPv3, and PI have reachability to...
Hi Rodrigo,
In case of you have only 1 node in Standalone, and requires to change the IP address, without any dependency on certificates, is it feasible to only change the configuration directly on the interface on CLI?
Hi danda,You can find a lot of guide regarding ISE design and deployment here:ISE Design & Integration GuidesFor specific WLC & ISE integration, here is the guide:How To: Universal Wireless Controller (WLC) Configuration for ISEI hope you can fin...
Hi Dan,
Can you share the provided workaround? I'm stuck trying to upgrade a NGFWv from 6.2.2.2 to 6.2.3, getting the disk space errors.
I tried to free some disk space erasing old update files, logs, tmp and so on, but still unsuccessful.
Than...
