Hi,In the past when upgrading our small cluster we've upgraded the Publisher and then upgraded the Subscribers and then rebooted/switch version the Publisher and then the Subscribers. This has worked fine. We're looking to go from 12.5 SU3 to 12.5 SU...
Does anybody have additional information on bug CSCvx76922, it mentions "If switch version is done first on the Publisher, this issue will not be seen." but the sequencing says to upgrade the publisher then upgrade the subscribers and then reboot swi...
Hi,The release notes for 12.8(1) https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/firmware/12-8-1/p881_b_rns-8800-1281.html#reference_BAE740471B28205F490DCD0E10B782FE mention Lower your voice and Mark call as spam as being avail...
Have a query regarding switch stacks, if a stack member is temporarily removed from the stack and then a change made on another member what happens when it's plugged back in?
Hi,
We have a 3850 stack that has 2x 3850-48T and 1x 3850-48P. We want to remove the 3850-48P and replace it with a new 3850-12X48U, this will have the 8x10G module, the existing 3850-48P has a 4x10G module.
How do we achieve this when the switch...
Switch 1 config was unprovisioned before renumbering, the switch had different interfaces so thought it wouldn't work anyway. Will remove switch 4 and we're done. Thanks.
Thanks,
I don't think renumbering moves the config, I did the renumber but no config came across and had to reenter it, does that sound right? I should have removed switch 1 and then provisioned switch 1 prior to renaming? Seems good now, will now ...
Hi,
Thanks for responding, the stack was running 3.7.5, we downgraded the new one before adding it.
I provisioned the new switch as number 4 and copy/pasted the config from the one we're replacing which is number 1, only change was ports 37-48 are ...
Interface appears fine, no errors. It's something to do with the mac not being added to the table, suspect the adapter is faulty but wondering if there's a way to work around this, have tried a static arp with no success.
ThanksBen
Hi,
It was working correctly until just recently when it suddenly stopped, it was being worked on by a technician. vlan assignment is correct, all hosts are in the same subnet.
The reason I mention ARP is that it's not registering. Does a cheap unm...
