About Arbenjamin

Arbenjamin · 05-25-2018

Hi All, Our clients are migrating from the movi to jabber. For the video call with poor network country, packet lost is always reported. However, the client observed the Movi is better than Jabber in video quality with non-optimal network. In Movi ...

Arbenjamin · 10-19-2016

Dear All, Hope you all doing well. We have collected Be6k demo device, however, we dont have the login and password of the ESXi . Anyone know how to reset the be6k as a fresh installation? or how to reset the ESXi? Million thanks. Best Regards,...

Arbenjamin · 07-13-2016

Dear all, We are trying to convert the DX80 from the Android-based software to CE software ( refer to document: Convert betweenCE software and Android-based software Migrate DX devices to CE software). Based on the document, it require the CUCM 10.5...

Arbenjamin · 12-15-2015

Dear All, Thanks for any comments. In the testing environment, there are two cucms and a pair of VCS expressway( core and edge). However, the jabber client report the soft-phone service in public internet is not always ready. It can be solved by...

Arbenjamin · 08-10-2015

Dear All, There is a Cisco 2911 and ISDN BRI service in the test lab, and we would like to integrate the ISDN service on the Cisco 2911 router.Should we purchse the 1-port isdn bri wan interface card or 1-port analog modem interface card? Please shar...

Arbenjamin · 05-27-2018

Thanks Rath ! you are life saver!

Arbenjamin · 07-18-2016

Dear Shashank Mahajan, Hope you are doing good :D Thank for your excellent explanation. I have upgrade the existing cucm from 10.5.1 to 10.5.2, and the installed following software file: cmterm-devicepack5.2.13034-1.copcmterm-synergy-ce8_2_1_no_de...

Arbenjamin · 02-03-2016

Hi Jaime, Hope you doing well. You are correct, that is a network issue. We are appreciated on your support. Best Regards, Benjamin Lai

Arbenjamin · 12-15-2015

HI Manish, Thanks for your comment, but I am not confusing on the port number of SIP trunk between the VCS and CUCM. From the page 39 of the document (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Mobile...

Arbenjamin · 08-14-2015

Dear mohammed al baqari, We will order this module and implement it .Thanks for your time :) Best Regards,Ben

Member Since	‎04-06-2011 03:09 AM
Date Last Visited	‎03-19-2021 12:01 AM
Posts	225
Total Helpful Votes Received	9

User Statistics

User Activity

Technical support on jabber/movi in a non-optimal network

How to reset the ESXi from the Be6K device.

CUCM version requirement on Convert between CE software and Android-based software

SIP port on between two CUCM and VCS with Mobile and Remote Access

Add ISDN service BRI on the voice router 2911

Re: Technical support on jabber/movi in a non-optimal network

Dear Shashank Mahajan,

Hi Jaime,

HI Manish,

Dear mohammed al baqari, We