About Tony M

Tony M · 03-29-2023

There is an SMU available for 17.3.6 but 17.3.6 is not listed as an affected version in the bug report. Can the bug report's list of affected versions be updated to reflect that 17.3.x is affected by this bug?

Tony M · 08-05-2022

I have a 9800-L-F currently running 17.3.5b (though this was happening on 17.3.x as well). With either ip tacacs source-interface GigabitEthernet0 or ip tacacs source-interface GigabitEthernet0 vrf Mgmt-intf commands configured, the WLC still uses vl...

Tony M · 07-31-2020

Hello, I have a demo C9800-L-C-K9 and a bunch of 9120 APs that I am using to prove that the controller will be able to replace the 5508 and 3500/3700 APs we are currently using for OE. The APs were able to connect to the controller internally and hav...

Tony M · 02-18-2020

Greetings ISE People, We have been using reauthentication on our desktop/user ports (on Catalyst 9348 switches) running Fuji (16.9.4). ISE is at version 2.4, patch 8. The problem we've been seeing is that, upon expiration of the reauthentication time...

Tony M · 02-04-2020

Greetings,I am implementing a combination self-registered and sponsor portal for guest access. Reading the Configuring Guest Access Chapter of the Cisco Identity Services Engine Administrator Guide, Release 2.4, I don't see any indication of which s...

Tony M · 08-08-2022

Interesting that it would accept the configuration at all. Even a warning would have been useful.Thanks for the clarification!

Tony M · 08-08-2022

No. G0 is management.

Tony M · 08-12-2020

Got back to this yesterday. Certainly, the command to include the public address in the response was missing. I think this was because of reapplying the nat command when we switched WIM to a different interface temporarily. Thanks!

Tony M · 08-05-2020

Thanks Scott. I followed that guide but still have no connection. I've confirmed that CAPWAP ports are allowed and I do see a response from the controller, however communication between the AP and controller is brief and incomplete. From the firewall...

Tony M · 05-07-2020

Please disregard the incorrect broadcast address in the ip addr show command below. I was replacing the values with the ones you were using but missed one :)

Member Since	‎10-30-2012 02:17 PM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	27
Total Helpful Votes Received	15

User Statistics

User Activity

CSCwd03847 - Cisco IOS XE Software for Wireless LAN Controllers HTTP..

Catalyst 9800-L Seems to Ignore ip tacacs source-interface command

9120 Can't join C9800-L-C-K9 as an OEAP

ISE 802.1X Reauthentication and client dropped packets

Which nodes send the emails?

Re: Catalyst 9800-L Seems to Ignore ip tacacs source-interface command

Re: Catalyst 9800-L Seems to Ignore ip tacacs source-interface command

Re: 9120 Can't join C9800-L-C-K9 as an OEAP

Re: 9120 Can't join C9800-L-C-K9 as an OEAP

Re: Cat9300 Guestshell Question