About DannyHuston

DannyHuston · 09-07-2014

What would be the best practice method of enabling routing (doesn't have to be dynamic but would be nice to have the option) between 2 pairs of Nexus 7Ks? I understand VPC peer links wouldnt work and separate links with routed interfaces should wor...

DannyHuston · 07-02-2013

Hi allI have two 6509-Es configured as non-VSS and running MSTP so that one 6509 is root bridge for Instance 1 and the second 6509 is rooto bridge of Instance 2. I want to attach a pair of 4500-X switches configured for VSS to uplink into these 650...

DannyHuston · 06-20-2013

I've gotten most of my NATs figured out but how do you convert this example into the new NAT format? CAn anyone assist?static (INSIDE,OUTSIDE) tcp 10.10.10.1 www 20.20.20.1 www netmask 255.255.255.255static (INSIDE,OUTSIDE) tcp 10.10.10.2 11080 20.2...

DannyHuston · 06-10-2013

we just had a new circuit install at a remote data center and from what I can tell there is a big difference between what the provider is transmitting vs what I'm receiving Provider Edge Laser output power : -2.1...

DannyHuston · 05-31-2013

I want to create a prefix-list where it matches this subnet 10.10.8.0/22 and also match any /23 and /.24 within that same subnet. Is the correct syntaxip prefix-list test permit 10.10.8.0/22 ge 23 le 24

DannyHuston · 09-07-2014

Thanks but I'm aware how to connect a pair of 7Ks. My question is what is best practice to connect TWO pairs of 7Ks through Layer 3 (no layer 2). Lets say I have the following First pairN7K1-A and N7K1-B (they host a subnet 10.10.10.0/24)Second pa...

DannyHuston · 07-02-2013

Thanks!

DannyHuston · 07-02-2013

Thanks. I actually dont want the 6500 on VSS yet. They will remain apart in non-VSS mode. I was just making sure there aren't special considerations needed for MST on the 4500s when i hook up the etherchannels into the 6500s (my first time working...

DannyHuston · 07-02-2013

I'm actually using these VSS enabled 4500s to terminate my ASA firewalls' Inside interfaces to (they are configured for 9.0 clustering). As far as spanning tree goes would the configuration remain the same? IE6509-Aspanning-tree mode mst!spanning-tr...

DannyHuston · 06-20-2013

Thanks!

Member Since	‎05-04-2012 08:21 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	45

User Statistics

User Activity

Routing between 2 pairs of Nexus 7Ks

Configuring 4500-X with VSS but used as access layer

converting 8.2 to 9.0 NAT example

troubleshooting fiber

Need help with prefix list

Thanks but I'm aware how to

Configuring 4500-X with VSS but used as access layer

Configuring 4500-X with VSS but used as access layer

Re: Configuring 4500-X with VSS but used as access layer

converting 8.2 to 9.0 NAT example