About bmuggall

bmuggall · 08-28-2012

Hi, I was trying the following scenario in my GNS simulator. I could not see bgp community attribute taking effect. Please let me know what is going wrong here.|R7|------|R5|R7:==router bgp 200 no synchronization bgp log-neighbor-changes network 70...

bmuggall · 08-28-2012

Thats great. That solved the issue. Thanks a lot.

bmuggall · 03-21-2012

Thanks for your explanations. Here is my question on the same line. For Eg: I have a low speed link..let us assume it is less than 768 kbps. I want voice packets to have less delay than any other data packets. So, here are the two approaches I can th...

bmuggall · 04-27-2011

Hi, There is no difference as per theory. You can do either way. Reg,Balu

bmuggall · 04-27-2011

Hi, Can you change VTP mode on switch1 to v2?reg,Balu

bmuggall · 04-21-2011

Hi, Create two default routes with different administrative distance. If one of the link goes down, then other will take over.Refer to http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094195.shtmlReg,Balu

Member Since	‎01-26-2011 09:07 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	13
Total Helpful Votes Received	1

User Statistics

User Activity

bgp community

bgp community

LFI vs QoS

Re: EIGRP basic

Re: STP root selection error

Re: Traffic auto switch over ??