JATINDER KUMAR

chris i wanted to put both queries in same... but then i had this experience also when sm1 champ lik...

all the three DNs are in different partition ... i am able to make calls within partitions as of now...

a. if i define the partition of the called number in the CSS of calling phone then problem is if the...

hi Hitesh .. ok for messgae "your call can not be completed if dialed. please consult your directory...

friends i have multiple ISDN (BRI) lines coming on my cisco 3825 and my call manager is 6.1.3 CUCM f...

friends.. i know i am missing something very stupid .. but i configured a new ISDN BRI on my router ...

my processor utilization is 22%. IOS : c3560-ipbase-mz.122-35.SE5.bin any help plz

friends.. i have this 3560 which was connected to my network and when i tried pinging it over LAN it...

hi mark it looks to me point 3 from above ... as my lan ports arre working fine only POE is not and ...

hello harsha/ Leo ... i did the interface command but no luck.. please see attached the output of sh...

yes Mark.. its a POE switch... model i have specified above.. show power inline shows all off ;( as ...

came across a very weird stuff.. swapped a POE with Cisco Catalyst 3750-24PS Switch but POE is not w...

all is explained in my first post. I am not sure why we are making it so complex. I asked something ...

Can you help me with this simple thing that if I want my voice traffic should get priority and a cer...

wow this made me more confused... friend i am very new to this and i need help for setting up QoS fo...