Hi Forum,
as I´m stuck, I´m opening this discussion.
I´m unable to create a Extend and Connect Device (CTI Remote Device) in CUCM using AXL. I´ve already noticed two discussions:
Here: https://community.cisco.com/t5/management/create-a-cti-remote-d...
Hi Forum,
has anybody already integrated CUCM Release 11.x with MS Windows Server 2016 ADFS Role?
I´ve already had MS Windows 2008 (ADFS 2.0) and MS Windows 2012 (ADFS 3.0) successfully integrated, but can´t find any reference for MS Windows 2016 A...
Hi NetPro´s,I have a issue with a CUCILync Integration with a CUCM Version 8.6(2) running. The CUCILync is the latest version and running in "Desk-Phone controlled Mode".When now a user dials a number that is busy, he gets the error notification belo...
Hi NetPro´s,I´m actually working on a Intercom solution that should be able to broadcast the UDP RTP stream to different locations (over the WAN).Therefore I already tested a behaviour (with NAT) to convert a single UDP stream (that will be send over...
Hi Community,I'm actually tryihg to configure a SPAN Destination Port which is also able to send and receive Traffic for the host itself. This feature should be possible with the "ingress" sub-command.Here 's a sniplet of my config:!interface Gigabit...
Hi Everyone.
I´m still having the same issue.. Now with CUCM 12.5 or 12.0 .. or 11.5 latest SU.
Is this still not fixed?
Does anyone maybe has a workaround with an XML file as an example for me?
Cheers
Torsten
Ok, sounds interesting..My team and me are currently investigating in a similar thing. We would like to receive a SIP-Notify.. when we have any update that may help you I´ll provide it to you. Torsten
