About Artem Grigoryev

Artem Grigoryev · 02-10-2017

Hello. I have two cisco Nexus 9372 in vPC domain and have four switches 3 com 5500G EI in XRN stack (common control and data plane). See the attached shemes. Trying to understand what the best way to connect them with each other? What to use vPC, L3...

Artem Grigoryev · 05-27-2014

Hello.We have WSA s170 and using it like proxy with NAT.M1 - vlan 10 - for managementP1 - vlan 20 - recieve Client's requests (Private IP addresses)P2 - vlan 30 - (DMZ) connected to Internet with Public IP. User's vlans 101-105 AccessSwitches] <--->...

Artem Grigoryev · 01-25-2018

Hello, I have the same issue.

Artem Grigoryev · 11-08-2017

I've upgraded today to new available AsyncOS 11.0.0 for Cisco IronPort C170 build 264. and Have the same issue.

Artem Grigoryev · 02-14-2017

Hi, As I understood Cisco Nexuses operates like one device on Layer 2 and like two devices on Layer 3. or another case make routing on the DC2ASA1 firewall (if we have some routes only). Well. And for example We have VMWare ESXi hosts that must be c...

Artem Grigoryev · 02-10-2017

Hi, Thanks willwetherman. But.Ok. But, for what purpose the N9k can be configured with Layer 3 Port-channel interface? Hm.

Artem Grigoryev · 02-09-2017

Hello. Sorry, but i confused with configuring vPC with Layer 3. I find different recomendation for configuring vPC with Routing but only for n5k and n7k. But what about n9k. I have two n9372TX with NX-OS. I need to connect nexus and 3 com usin Layer...

Member Since	‎06-14-2013 01:05 AM
Date Last Visited	‎12-10-2018 12:13 AM
Posts	7

User Statistics

User Activity

Nexus 9372 vPC and L3 connection

How to connect WSA with L4TM Simplex mode and NAT?

Re: Cannot grant access to the Smart Net Total Care portal

Re: CSCvf55780 - On 9.8 and 11.0 ESA code, cluster error every 62 minutes - Error Existing connection dropped - 2

Hi,

Hi,

Hello.