Hi Holger,maybe you want to check this outhttp://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b37d0b.shtmlhttp://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a0ece4.shtml
AFAIK there should not be any issues in creating EzVPN or Site to Site VPN provided we have underlying layer 2 and layer 3 correctly configured.what constraints make you feel this is not possible, could you please provid the topology wth devices(hard...
Hi Raj,It is expected that when you change the username and password on the dialer , it will not be up until you put back the correct username and password.please correct me if your query was something different.Thanks
Hi Fida,Yes you can achieve that logic.This can be done by using a floating static route with the primar having higher preferenceip route 0.0.0.0 0.0.0.0 ip route 0.0.0.0 0.0.0.0 200but only above config might have some loopholes like when the prima...
Hi Jonathan,you have bgp peer on gig interface, which should not be genrally causing any bottleneck,to troubleshoot this further i would perform following task to further isolate the issue.1. check if the CPU is highly ustilised when the telco report...
