About bret

bret · 01-13-2020

I have been trying to find the answer but after my attempts failed I am hoping y'all can help. What commands are added to a switch/router to show the out put below every time I run a show command? After starting up a stack of new switches this output...

bret · 11-01-2019

I have a small Aruba environment that uses ISE 2.4 for the guest portal. The guest is able to connect to the guest WLAN, authenticate, and ultimately connect to the internet. Whats odd is that after logging in the client drops the wireless connection...

bret · 04-25-2019

I have read several great community posts and may have missed one that can solve my problems. So, any help the community can provide will be greatly appreciated. After reading some of the community posts I was able to add HTML code to the optional ...

bret · 03-08-2019

Has anyone recently experienced a pop up saying "Wireless controller says Cannot delete globally configured AP"? This pop up just started happening and the only change we have done is upgrade from 8.1 to 8.3 and never noticed the pop, then recently ...

bret · 02-21-2018

I am finalizing a new Sponsor Portal with Guest Self Registration. As I started to do testing I saw several errors. A case has been raised with Cisco and they are parsing through the support bundle. They tend to get tied up with other cases, so I ...

bret · 01-14-2020

Thanks for responding Leo. This is not a problem and more of a I need to know situation. The switch stack is 2 - 2960X-48FPS-L and they were upgraded to 15.2(7)E0a. Thanks!

bret · 11-04-2019

Thanks and I will review the live logs further for evidence of why the repeated COA is occurring. If need be I will then open a case.

bret · 04-25-2019

Can I use an existing portal with the portal builder? If not, I would really like to use the built in portal tool.

bret · 02-26-2018

Good to hear.P.S: Please rate s helpful/acceptable solution if applicable. thank you!

bret · 02-26-2018

The example I provided will give you the username and password in the approval email and the guest will not get their creds until you approve. This is the same username and password the guest will use during their login after the approval link is cl...

Member Since	‎12-02-2004 11:20 AM
Date Last Visited	‎07-29-2020 12:06 AM
Posts	189
Total Helpful Votes Received	50

User Statistics

User Activity

Curious why Show Commands display Load for Five Secs:

ISE CWA Causes Multiple Authorization Policy Hits

Customize Guest Portal Page - Custom Banner Title and Adjust AUP Page Size

Wireless Controller Mgmt Page Pop Message "Wireless controller says Cannot delete globally configured AP"

Odd ISE 2.3 Sponsor/Guest Portal Issues

Re: Curious why Show Commands display Load for Five Secs:

Re: ISE CWA Causes Multiple Authorization Policy Hits

Re: Customize Guest Portal Page - Custom Banner Title and Adjust AUP Page Size

Re: ISE: Send guest credentials to sponsor via email after approval

Re: ISE: Send guest credentials to sponsor via email after approval