Dear all, I come to know that cisco ISE posturing is not supported in cisco catalyst switches with LAN Lite image. Is there any way out to manage it with any agents installed ? Regards,Bikash
Dear all,What are the supported single port 8 Gbps FC HBA on Cisco UCS 240 M4 ? I could only find dual port HBA on cisco CCW. Are Emulex LightPulse LPe12000 or LightPulse LPe1250 supported on cisco UCS 240 M4 ? Regards,Bikash
Hi, Is Cisco UCS B200 M4 supported on UCS mini solution ? When I check UCS B200 M4 data sheet below it says " The UCS B200 M4 Blade Server mounts in a Cisco UCS 5100 Series bladeserver chassis or UCS Mini blade server chassis." http://www.cisco.com/c...
Hi,You can use any STP protocol as per your requirement. As per my experiences with SMB switches smart ports are always giving me trouble. With cisco 300 and 500 series switches I always disable smart ports as below before taking to production. conf...
Hi Walter,Thank you for your prompt response. Does it mean that we can configure RAID between two SD cards using Cisco Flexible Flash Controller. Regards,Bikash
Hi Walter, Have you ever tested B200-M4 in UCS Mini Chassis (Cisco UCS 6324 Fabric Interconnect ) ? If yes, then I go ahead and propose to my customers. Regards,Bikash
