About tachyon05

tachyon05 · 01-31-2024

What would cause this condition where the port is UP/UP but client not able to communicate with anything? The last input shows hours and sometimes days ago. These are smart TVs. Power cycle them do not fix the issue. We have some working TVs but ...

tachyon05 · 11-25-2023

When users get computers from DELL, they are able to complete setup from home or company guest network. However, when the guest network is down, they would then need to get on a hot spot which is not ideal. ISE is designed / configured to allow devic...

tachyon05 · 11-06-2023

I need to upgrade AnyConnect 4.10 because it is EOS on 3/31/24. The replacement product is Secure Client 5.x. Currently, users only have DART and NAM installed on their computers.1. Do I need to uninstall AnyConnect 4.10 or is that automatically do...

tachyon05 · 08-29-2023

I am on ISE 2.7 patch 7. Looks like patch 8 and 9 are available. Release note for patch 8 says Before installing Patch 8 on Cisco ISE 2.7 Patch 7, uninstall the hotpatch to fix CSCwa47133 from Patch 7. However, patch 9 doesn’t have this note. Doe...

tachyon05 · 07-25-2023

Access Point keeps registering to the wrong WLC, ignoring the WLC I specified in option 43. I confirmed the HEX value is correctly entered on the DHCP server using multiple generators. Any suggestions?

tachyon05 · 02-02-2024

I found out these TVs have LAN1 and LAN2, and their doc talks about giving priority to LAN1 (not sure what that means). Vendor connected cables to LAN2 on all TVs. TVs don’t send any packets for unknown reason. Some of the TVs have not sent any pac...

tachyon05 · 02-01-2024

Would you please clarify how DHCP snooping comes into play here? The TVs use static IPs. How would I check DHCP snooping table? Am I correct that the first step is for the switch to learn a mac address from the client? Without that, any potential...

tachyon05 · 02-01-2024

Thanks Everyone. See output below. Note the port config is standard and is identical to ports for working TV and laptop. As mentioned, laptop can connect to this port and get on network (static or dhcp). Both TV and laptops get on via ISE MAB. ...

tachyon05 · 11-08-2023

Thanks, and your experience is what I would expect, and hope Cisco provides to their customers. Looking at the download site, I see the only 5.1 version out there is 5.1.0.136 which came out 2 weeks ago on 10/27/23. There are several 5.0 versions w...

tachyon05 · 11-08-2023

Thank you. My TAC person said the following for some reason. I will try to get a test laptop and try it out.[+] Cisco Secure Client will not get rid of the previous installations of AnyConnect, you will need to uninstall first then install Secure C...

Member Since	‎04-15-2009 08:17 AM
Date Last Visited	‎02-05-2024 12:29 AM
Posts	161
Total Helpful Votes Received	30

User Statistics

User Activity

switchport UP/UP but no mac address or traffic seen

how to configure ISE to work with Autopilot

AnyConnect 4.10 upgrade to Secure Client 5.x

need to uninstall hotpatch to fix CSCwa47133 (log4j) when upgrading?

Windows DHCP option 43 not working

Re: switchport UP/UP but no mac address or traffic seen

Re: switchport UP/UP but no mac address or traffic seen

Re: switchport UP/UP but no mac address or traffic seen

Re: AnyConnect 4.10 upgrade to Secure Client 5.x

Re: AnyConnect 4.10 upgrade to Secure Client 5.x