Hi, You can raise a TAC case and they will assist with password recovery process.Or, if you have not ever logged in with the superuser account, you can use it to login and reset the password. username: superuserpassword: d3m0n0w From this login you c...
That's it.Once you connect the interfaces on the SAN controller and configure the fc port, you should see it FLOGI in to the MDS. So you can verify the WWPN via 'show flogi database'
Hi Jose,Very close Typically the SAN has the two controllers - but each port will have a different WWPN.So Controller A, port 1 will have a WWPN and then Controller A, port 2, will have a different WWPNHere is an example from my lab:MDS-Azone name gr...
Hi Jose.Physically your connectivity is good.On the UCS side, the 'Primary' and 'Subordinate' role refer only to the Management of the system and which device is actually running UCS Manager.Each MDS device will have separate configuration (zoning). ...
Russ, The TAC case is still open, so I'd suggest calling us just before you make the change. We can have an engineer check over the system before you make the change to ensure that HA to the blades is configured and then assist if there are any pro...
