Hi All,We would like to have motion sensor connected to the IR829.Any recommendation ? can we connect it directly to IR829 through USB ? or through its wireless ?Thanks!Regards,Edgar
Hi Chun Li,Please don’t worry, I was able to download the two images.Not sure why but it looks like Ping does not work from IR829 to my laptop but tftp works.I have a question.. as I can purchase sensors like action sensors and connect them/it to USB...
Hi Chun Li,It still does not work-.IR800#ping 210.210.210.1 source vlan 222Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 210.210.210.1, timeout is 2 seconds:Packet sent with a source address of 210.210.210.2.....Success rate is 0 pe...
Upgrading Cisco routers should be straight forward but it does not seem for this case.I can't find this info from this article.I connected IR829 Ge2 to my work laptop. I configured static IP address between two devices.IR829 does not take IP address ...