About rodmunch999

rodmunch999 · 12-04-2014

Hi,Hopefully, this is an easy question and I am just not looking in the right place.Is there somewhere on ACS v5.x where I can view a history of all the commands that were executed on the ACS CLI ?This is where I have looked:I have looked through the...

rodmunch999 · 03-14-2014

Hi,Has anyone had problems upgrading an ACS 5.2 to ACS 5.5?I am starting with a base machine running 5.2 Patch 5 which has a working/production configuration. The documentation states that to upgrade from 5.2 you have to upgrade to either 5.3 or 5.4...

rodmunch999 · 03-09-2014

Hi,We are trying to authenticate a Check Point Firewall(GAIA R76) to a 5.2 ACS using TACACS+We are able to authenticate the user OK but when we do a 'tacacs_enable TACP-15' to get elevated privileges the session hangs and gives 'internal error' mess...

rodmunch999 · 11-12-2012

HiI have just renewed the self signed certificate on a v5.2 ACS and expiry date of 2013 is showing in the ACS GUI. However, when I start an ACS Admin session and view the certificate information in the browser it is showing the old expiry date of 201...

rodmunch999 · 11-24-2011

Hi,Under the ACS 5.2 Release notes it states that the following Bug ID was fixed in v5.2:Bug IDDescriptionCSCsk52006Weak SSL ciphers supported, should be turned off.We have had a scan of our 5.2 ACS and it reports that the Web Interface is using a we...

rodmunch999 · 12-09-2014

Thank you Naresh. I was hoping there would be a cli command log that could reviewed but if that's the best there is then I will look at that.

rodmunch999 · 06-07-2014

Hi Chamara, I have successfully upgraded a hardware appliance in the lab from 5.2 to 5.5 but when I tried it in the production environment on a Virtual appliance it failed.(Not sure why yet) I am waiting to get a valid support contract arranged so I ...

rodmunch999 · 06-05-2014

Hi Chamara, The way I understand it is you can only upgrade a Primary server. So before you start the upgrade you must detach the Secondary from the Primary so you will be effectively upgrading 2 Primaries. Once the upgrade is completed on both serve...

rodmunch999 · 06-05-2014

Hi Chamara, The base v5 licence covers all current versions of ACS from 5.0 to 5.5 so you should not need to purchase a new licence. If you are running your 2 ACS servers as a Primary and Secondary (distributed deployment) then you should have 2 sepa...

rodmunch999 · 03-15-2014

Thank you Jatin! - I will give that a try soon. BTW - It is odd that all the ACS 5.x bugs are listed under "Cisco Secure Access Control Server Solution Engine" which is the old ACS. It should be listed under "Cisco Secure Access Control System" shoul...

Member Since	‎10-31-2007 06:51 PM
Date Last Visited	‎10-18-2017 11:11 PM
Posts	54
Total Helpful Votes Received	12

User Statistics

User Activity

Is there a log which shows that CLI commands that were entered on v5.x ACS

Unable to upgrade from ACS 5.2 to ACS 5.5 - Application will not initialize.

Unable to Authenticate Check Point (GAIA R76) and ACS 5.2 using TACACS+

ACS v5.2 - New Self Signed Certificate Not Showing In Browser

ACS 5.2 and Weak SSL Ciphers - Can they be turned off?

Thank you Naresh. I was

Hi Chamara, I have

Hi Chamara, The way I

Hi Chamara, The base v5

Thank you Jatin! - I will