hi all, need your advice. can this card (EHWIC-1GE-SFP-CU) work as normal port in router. plan to do a routing like EIGRP, OSPF, or others. when go through the data sheet said it true routed port. can someone confirm this for me.thanks!
Hi all,need to ask about implemanting Cisco ASA failover Active/Standbymy question are1) need to run ASDM on both active/standby same version?? lets say 6.4.52) failover link need to used crossover cable?3) IPS ver need to be same on active/standby
hi,to implemantation failover on ASA 5510 need to use the same model with 5510 with same IPS module also same license. my question is;1. can i use the same license on 8.2 for both unit?2. what type of license need to use for failover? example, Securi...
hi all, need help to upgrade cisco asa 5510 from 8.0(4) to latest ios. anyone can update me latest one and step to upgrade. also need to update IPS firmware also because this device together with IPS. can i use cisco ASDM to update? will all config ...
Hi Marius Gunnerud,by the way thanks. another questions. my current running unit is 8.0(4) and ASDM 6.3(3). can i know, where to download ASDM ver 6.3(3) for ASA 5510 except another method is copy flash tftp. i try cisco download but dont have this m...
in that link u give Andrew, Cisco only specific TFTP to transfer new version of IPS OS. can i use different TFTP like TFTPD32? or other? can u help me to find because im lost. im looking an example to make it work and easy to understand.