Hello, We have a very simple setup: The setup: In MPLS environment, PE1 (ASR9001) router (with IOS-XR 6.6.3) peering with upstream Internet provider - ISP1 (with a standard single hop eBGP session) and receiving the full Internet table + default rou...
Hello group,I'm struggling to make the PBR working on Nexus7010 (with SUP2,N7K-M132XP-12L and NX-OS 7.3.3 D1) The setup is the following small MPLS topology: <Customer CE router> --- <Nexus7K MPLS PE> --- <MPLS P router> --- <Egress MPLS PE router1 &...
Hello group,I'm struggling to make the PBR working on Nexus7010 (with SUP2,N7K-M132XP-12L and NX-OS 7.3.3 D1) The setup is the following small MPLS topology: <Customer CE router> --- <Nexus7K MPLS PE> --- <MPLS P router> --- <Egress MPLS PE router1 &...
Hello,
I'm pretty new to cisco's viptela and I would like to know is there any way to setup a trial lab (for education purposes only)? For edges I guess I may use the newer CSR1000v image, but what about vSmart, vManage and vBond?
How about the lic...
Hello,
I'm facing a strange QoS issue on ASR1001 router (IOS-XE image - asr1001-universalk9.03.13.06.S.154-3.S6-ext.bin).
Topology is pretty simple:
<VOICE INFRA> ---- (Gi0/0/2) ASR1001 (Gi0/0/0) ------ <WAN>
I have interface Gi0/0/2 connected to a ...
Hello Sam, We have exactly the same behavior on PE2 (ASR9001 platform again, but with much older code - IOS-XR 5.3.2). So there's something terribly wrong here, either with a configuration or a bug related to a specific setting (I'll try to simplify ...
Thanks for your input here Sam, I'll include all these for the next available window. Positive thing is that this behavior is easily reproducible (not in the LAB, though).That's my understanding as well for the flapping next-hop or route, however I d...
The ugliest diagram I've ever made.All internal routers are running multi-level OSPF + LDP for transport label signaling and PE routers are forming MP-IBGP sessions with all RRs for vpnv4 and ipv4 unicast AFIs. Core is BGP free.
Hello guys,Exactly the same issue here - I'm using 2951 running the latest (recommended) IOS - 15.2.4M6a with total of 15Mbps and this message constantly appears. I've searched for bugs and I couldn't find anything similar and I definatelly don't hav...
