About h-zenk

h-zenk · 01-13-2011

Dear Experts,may i request your advice.Following is the scenario:Imagine a subway tunnel.The trains, going with a maximum speed of 23 Meters per second are wireless clients with static IP configuration.Connectivity and roaming work excellentOn the ce...

h-zenk · 07-04-2013

Hi Rasika,we did all the tests you mentioned.Under all circumstances the Multicaststreams have been reflected in EVERY CAPWAP - tunnel.So the only thing i would have needed (2 years ago) would have been a command on the controller.Something like "do ...

h-zenk · 07-04-2013

Hi Rasikayou are understanding correctly.Up to 24 group addresses used,streams are delivered solely to the wire.If you read the first two posts of mine thoroughly you might get a good picture of the situation.RegardsHermann

h-zenk · 07-04-2013

Hi Rasikathere have been a maximum of 24 individual streams if i remember right.regardsHermann

h-zenk · 07-03-2013

Hello Joe,we stopped investigating into this issue as the underlying Multicast network easily handles the surplus multicast streams which are mirrored back to the Access Points. Second the controller load is not to high.May I say that i have a "feeli...

h-zenk · 01-14-2011

Hello Talal, hello Nicolas,thank you both for your kind answers.@ TalalAfter reading the excerpt of the config guide you mentioned in your post i am sorry to say that Nicolas seems to be right as the configuration steps covered imply wireless clients...

Member Since	‎08-04-2003 02:18 AM
Date Last Visited	‎12-15-2021 12:43 AM
Posts	9

User Statistics

User Activity

Upstream Multicast on WLC

Upstream Multicast on WLC

Upstream Multicast on WLC

Upstream Multicast on WLC

Upstream Multicast on WLC

Re: Upstream Multicast on WLC