About Andreas Jaeger

Andreas Jaeger · 02-13-2019

Hi, These two commands seem to be default in IOS16.9 test#sh run all | i vsa radius-server vsa send ...

Andreas Jaeger · 02-13-2019

Authentication (after port down/up) works properly. The timeout values from server are sucessfull tr...

Andreas Jaeger · 02-11-2019

I tested it on 9300 with 16.9 -> It works there. "show device-tr database" shows adjusted "Time left...

Andreas Jaeger · 02-11-2019

I'm currently testing IOS 16.9 with IBNS2 network access config on a 9300-Series switch . It seems t...

Andreas Jaeger · 06-20-2016

The most important information (I didnt find it in the manuals) is: Making the existing virtual hard...

Andreas Jaeger · 11-09-2015

How will I know if the settings that Cisco provied are ok (before deleting my modifications)?

Andreas Jaeger · 05-11-2015

I missed this option in CPI but found it directly on the controller GUI.using SSID Wildcard works.Af...

Andreas Jaeger · 05-11-2015

We have several switches (4507, 4510 and 6500-Series) with two supervisor engines providing redundan...

Andreas Jaeger · 02-24-2015

The controller runs 7.6.130Maybe its my fault using whe wrong.Whats the right way to use the wildcar...

Andreas Jaeger · 02-23-2015

I often notice that updated feed policies are skipped because the policy was canged by an admin (me)...

Andreas Jaeger · 02-23-2015

I am searching for a solution to automatically classify RogueAPs starting with a known string as fri...

Andreas Jaeger · 12-13-2013

Cisco opened a Bug for this:https://tools.cisco.com/bugsearch/bug/CSCuj48111

Andreas Jaeger · 09-18-2013

I updated the server to 1.2.0.899 - still the same issue.

Andreas Jaeger · 07-24-2013

I have the same Problem after updating an SRE-WLC in an C2951Router.After the update it can't ping t...

Andreas Jaeger · 07-15-2013

Are you kidding?•Mozilla Firefox 3.6 - outdated Mar 2011•Mozilla FireFox 9 - outdated Jan 2012Curren...

Re: Session Timeout for dot1x not working on IOS 16.9 on 9300 Series Switch