Hi, I am also looking to do the same thing on 1130AGs. Going through all values in the dot11 association MIB including the one you mentioned doesn't appear to give any directly usable value.You can get the vlan IDs for all clients using 1.3.6.1.4.1.9...

try here for the ip helper command reference, and config guide:http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/index.htmFor the DHCP superscoping you will need to search on Microsoft.com. Its a pretty common setup, so try googl...

you need to configure 'super-scoping' on the server, and place an ip-helper address on each vlan interface, forwarding the DHCP requests to the IP address of the DHCP server.

Hi, I have a similar problem with an AS5350 with an E1 PRI and the DFC card. The Client (win2K) dials in ok, and you are prompted for the callback number. The server then goes through the hang up process and calling back, but the client sits there sa...

The same applies to policy routing commands, which are visible, and even enterable on the command line, but do not actually work. Cisco will apparently add this particular feature early next year.It looks like they stripped down the IOS to get it wor...