Does anyone knows if there is a way to add FAC to a user on the UC320, or if there is a way to block some patterns like for example 9,01900XXXX, but allow others like 9,01800 xxxx etc.RgdsVicente
Hi,i have a VPN conentrator receiving site to site vpn from a cisco 861, on te remote router (cisco861) when it boots up the vpn does not come up automatically it is necessary to have traffic, but as this remote site has DCHP and my monitoring is fro...
I Have a FWSM running in multiple context mode with two context configured, each context is using a differente SVI for communication between the MSFC and the FWSM. From the beginnign the solution has been workin fine and traffic between contexts and ...
Hi Tagir,i'm trying to do the same integration, can you share the docs that you consult to integrate vía SIP Trunk the spa8800 with the CUCM¿?RgdsVicente
Hi,do you know if there is at least a config file on the PC where i can modify the TFTP server ip address ?? so the user does not have to configure it manually going to preference, etc. The Communicator is already created on the CUCM.Thanks
Hi Paolo,i'm having the same exact problem, it is a UC540, but it is also CME 8.6, i did the "debug ccsip message", it only happens when i initiate the call from the jabber, when the call is initiated from another phone to the jabber, it does not dro...
