Dearsetting the below configuration the inside devices are not able to nat to outside runing packet tracer Type: HOST-LIMIT is Dropping althought there is only 1 userplease advisesh run : Saved:ASA Version 8.4(6) !enable password passwd names!interfa...
Dearsis it possible using standard b-acd on cme 9 (no unity nor cue) to creat multi level AA as such- main welcome message with options to -- 0 for operator -- directly dial internal extension -- choosing from 3 brands - each brand with its...
Helloi have AIR-BR1310G that came with its proper power injector AIR-PWRINJ-BLR2 can this power injector be feed using a POE switch or do i have to use the 48v power adapterregardsElie
hellonow that IOS Content Filtering using Trend Micro is EOL and replaced by ScanSafe, can someone tell if ScanSafe is a subscription based and what are the new SKUs for ScanSafethanks
Helloinstalling 2 AIR-BR1310G-E-K9-R (Aironet 1310 Outdoor AP/BR w/RP-TNC) as wireless bridge and using AIR-ANT2410Y-R 2.4 GHz,10 dBi Yagi with RP-TNC Connector as antennascan someone tell the minimum number of antennas needed at each side, i was con...
thanks Jennifer for your replyi contacted our distributor a week ago and did not get any answer, all i knew is that ScanSafe comes with the security bundlesearched in the commerce workspace while configuring a 3900 router without any succcessregards
Hi EddieWere you able to discover what is the sku of scansafe replacing the 2900 content filtering?What is the fate of end users with expired content filtering subscription?RegardsElie
thank you Rob, Georgei may not need to use diversity since the antennas & bridges will be connecting 2 buildings in open air with direct line of sight at a distance of 150mcheers
